Rangemaster U109200-03 manual Positioning Your Appliance, Choosing the right location, 15mm

Positioning Your Appliance

Choosing the right location

This appliance should be installed in a room, which is dry and well ventilated.

In order to ensure adequate ventilation, the appliance should be at least 1.5cm clear on all sides from kitchen cabinetry, and any units placed above the appliance must be clear by 1.5cm – allowing adequate ventilation for the appliance. See clearance diagram.

and this may damage foods. Please ensure that the ambient temperature does not drop below that specified by the climate class and that temperatures are maintained as consistently as possible.

Connection to the electricity supply

Connect the appliance to the electrical supply (220 – 240V ~ 50Hz) with the plug and lead, which are fitted. Connections to the mains supply should be in accordance with local regulations.

590mm

400mm

15mm

450mm

15mm

This appliance will operate within a range of 187-253V. Operation outside this range may result in damage to the control panel, thermostat or compressor, unless a regulator with a capacity of 750W, or higher, is installed.

The appliance must be plugged into an earthed socket.

•Always make sure that the plug is accessible after the appliance has been positioned.

•The refrigerator is supplied with a standard three-pin plug, of which the one for grounding should never be removed.

Care for the external cable

•Hold the plug, not the electrical cable, when unplugging the refrigerator.

•Ensure that the refrigerator does not trap the electric cable.

•Do not step on the cable.

•Avoid damage to the electric cable when moving the refrigerator.

Damaged electrical cable

When the electrical cable is damaged or worn, turn off the refrigerator and consult an authorized agent for replacement.

If located close to a corner adequate spacing must be left for door opening and removal of shelves. Refer to diagram.

This appliance should be 10cm at least from any electric or gas cooker and 30cm from any coal or oil stove. If this is not possible, ensure that appropriate insulation is used.

Avoid exposing the appliance to direct sunlight, and sources of heat (radiators, heaters, cookers etc.).

If this appliance is situated in a cold environment (shed, out house, garage etc.) it will affect its performance. You may find that the performance of the appliance is not consistent

If inflammable gas leaks in the vicinity of the refrigerator

•Turn off any leaking valve

•Open the doors and windows

DO NOT under any circumstances unplug electrical appliances in the vicinity of the leak.

Unplug the refrigerator when:

•Cleaning or maintenance

•Replacement of the lamp.

U109200-03 4