Manuals / Ranger / Home Audio / Radio

Ranger RCI-6300F TB, RCI-6300F HP PLL Circuit, Receiver Circuit, Transmitter Modulation Circuit

Models: RCI-6300F TB RCI-6300F HP

1 45
Download 45 pages 18.72 Kb
Page 11
Image 11

3.1 PLL CIRCUIT

The Phase Lock Loop (PLL) circuit is responsible for developing the receiver’s first local oscillator signal and the transmitter’s exciter signal. The PLL circuit consists primarily of IC2, IC3, IC4, IC5 Q25, Q27, Q28, Q29 and Q61. The PLL circuit is programmed by the rotary channel switch GPS-0501. The switch communicates the correct binary data information to the programmable divider inside of IC3. IC3 then controls the VCO (Voltage Controlled Oscillator), consisting of VCO to oscillate on the correct frequency. This signal is fed either into the receiver’s first mixer (for receive operation) or the transmitter’s mixer (for transmit operation).

3.2 RECEIVER CIRCUIT

The incoming RF signal comes into the radio via the antenna and into the front-end pre-amp, Q17. The RF signal is fed into the mixer circuit Q18 & Q19 and then into the IF section of the receiver (depending on the mode of operation). The signals is then detected by either the AM detector or FM detector and then fed to the audio amplifier section of the receiver and finally out to the speaker.

3.3 TRANSMITTER MODULATION CIRCUIT

(i)The transmitter modulation circuit modulates the low-level RF signal from the PLL exciter circuit with the user’s audio voice signal from the microphone. The audio from the microphone is then amplified and fed into the transmit amplifier circuit.

(ii)If the transceiver is in the AM mode, the AF power amplifier modulates the last RF amplifier which produces a true amplitude modulated RF signal.

3.4 TRANSMITTER AMPLIFIER CIRCUIT

The transmitter takes the basic exciter signal from the TX mixer and amplifies it through a series of amplifiers consisting of Q50, Q51, Q49, Q47, Q48 and EPA010010A (only for RCI-6300F TB) where it is sent out to the antenna connector.

- 10 -

Page 10 Page 12
Page 11
Image 11
Ranger RCI-6300F TB PLL Circuit, Receiver Circuit, Transmitter Modulation Circuit, Transmitter Amplifier Circuit
Page 10 Page 12

RCI-6300F TB, RCI-6300F HP specifications

The Ranger RCI-6300F HP and RCI-6300F TB are highly regarded models in the world of amateur radio, designed for an optimal user experience and powerful performance. These transceivers stand out due to their robust capabilities, making them suitable for both experienced operators and newcomers alike.

One of the key features of the RCI-6300F HP is its reliable power output. Operating at up to 300 watts, this model ensures a strong and stable signal, making it an excellent choice for long-distance communications. The RCI-6300F TB, while slightly less powerful, still delivers a solid performance with its own set of impressive features. Both models are equipped with an advanced Linear Amplifier that enhances their overall transmission quality.

The design of the RCI-6300 series showcases a user-friendly interface with an intuitive layout. The large front panel display provides essential information at a glance, including frequency, mode, and signal strength. The controls are ergonomically placed, allowing for easy adjustments even during operation. With a variety of modes available—including AM, FM, SSB, and CW—users can choose the best setting for their communication needs.

An innovative technology incorporated into the RCI-6300F models is the built-in Automatic Noise Limiter (ANL) that effectively reduces background noise, improving clarity and ensuring that conversations remain intelligible. The dual receive capability allows operators to monitor two frequencies simultaneously, enhancing situational awareness on the airwaves.

The RCI-6300F series also includes advanced filtering options. The variable bandwidth filter enables users to adjust the audio response, tailoring signals to their preferences. Additionally, the models feature an internal SWR meter, providing real-time feedback on the standing wave ratio to help optimize antenna performance.

Constructed with durability in mind, the Ranger RCI-6300F HP and TB are designed to withstand the rigors of regular use. This ruggedness, coupled with advanced thermal and overload protection, makes these transceivers reliable companions for any operator.

In conclusion, the Ranger RCI-6300F HP and RCI-6300F TB models offer a treasure trove of features and technologies, elevating the user experience in amateur radio communications. With their powerful output, advanced filtering, and user-friendly design, they stand out as exceptional choices for enthusiasts looking to enhance their radio operations.