1. Introduction

This User’s Guide describes how to install the RATOC CBS52U PC Card Adapter (called CBS52U in this User’s Guide).

The information in the README.TXT file on the CD-ROM may include the latest information. Be sure to read the file as well. Refer to our web site for the information on Linux. (http://www.ratocsystems.com/english/)

1-1. Package Content

Check the package contents:

-REX-CBS52 PCI Board -CD-ROM

-User’s manual

NOTE

If any of these items are missing from the CBS52U retail package, contact your supplier

immediately.

1-2. System Requirements

-PC with an availabe PCI slot

-Windows XP/Windows Me/Windows 2000/Windows 98SE

1-3. Restrictions

1.There may be some PC Cards which don’t run with the CBS52. Refer to our web site for our latest information(http://www.ratocsystems.com/english/).

2.You need to prepare the followings before you install the CBS52.

1)You need to finish updating the latest BIOS in your PC.

2)You need to finish updating the latest Service Pack for your OS.

3.ZV/Multi-function PC Cards don’t run with the CBS52.

4.The CBS52 doesn’t support ACPI mode of Windows 98SE.

5.The CBS52 doesn’t run on SOTEC PC STATION M760, COMPAQ PROLINEA590, DELL OptiPlex GXPro.

6.The CBS52 doesn’t run on P3C series mother board made by ASUS, GA-7ZXR made by GIGABYTE.

7.Multi-processor, Dual CPU aren’t supported.

8.The CBS52 may not run on a modified PC.

9.The CBS52 may not run with a server computer.

10.The other PC Card Adapters other than the CBS52 must not be used with the CBS52 simultaneously.

11.The specifications of hardware/software are subject to change without notice.

3