Installation | Ratoc Systems CFU2 specification

2. Installation

Follow the instructions below to install drivers.

1.Confirming a folder structure in the software CD-ROM (See 2-1).

2.Connecting the PDA to the PC system with ActiveSync (See 2-2).

3.Installing the CFU2 Host Driver (See 2-3).

4.Installing the HID Driver, if the USB device is an HID(Human Interface Device) such as a USB keyboard, USB bar code reader, etc (See 2-4).

5.Installing the Mass Storage driver, if the USB device is a mass storage devices such as an USB Flash Disk, USB MO (See 2-7).