Raymarine 81006-3 Important information

2 Linear Rudder Position Sensor

Important information

This equipment must be installed and operated in accordance

with the instructions contained in this handbook. Failure to do so

could result in poor product performance, personal injury

and/or damage to your boat.

Because correct performance of the boat’s steering is critical for

safety, we STRONGL Y REC OMMEND th at an Aut horized

Raymarine Service Representative fits this product.

Although we have designed this product to be accurate and

reliable, many factors can affect its performance. As a result, it

should only be used as an aid to navigation and should never

replace commonsense and navigational judgement. Always

maintain a permanent watch so you can respond to situations as

they develop.

All Raymarine equipment and accessories are designed to the best

industry standards for use in the recreational marine environment.

The design and manufacture of Raymarine equipment and

accessories conform to the appropriate Electromagnetic

Compatibility (EMC) standards, but correct installation is required to

ensure that performance is not compromised.

To the best of our knowledge, the information in this handbook was

correct when it went to press. However, Raymarine cannot accept

liability for any inaccuracies or omissions it may contain. In addition,

our policy of continuous product improvement may change

specifications without notice. As a result, Raymarine cannot accept

liability for any differences between the product and the handbook.

81006_3.book Page 2 Tuesday, May 22, 2001 1:03 PM