30 | S1000 Autopilot Installation Guide |
Checking direction of turn - sheet 2
2. Hold down < and > in turn, and as each of these is pressed, ensure that the outboard motor(s) turn(s) to give the correct direction of steer.
3. If the outboard motor(s) does/do not move correctly, DO NOT USE THE BOAT. At the S100 Remote, hold down STANDBY for 2 seconds to leave Setup mode and return to Standby mode, then check that the S1000 components have been installed correctly. In particular, check that the autopilot pump wiring and hydraulics are connected correctly.
