Xtreme Access
The XFyre is purpose built for the contractor and service professional.
7
4 8
Completely serviceable from the front, top and both sides!
1. Flue Outlet | 5. Direct Vent Capability | 8. Inlet and Outlet Connections and Flow Switch | |
Category IV- PVC, CPVC and Stainless steel certified. | Every XFyre is direct vent capable. By installing an | The vertical inlet and outlet connections are all copper | |
The XFyre ships PVC ready, no extras to purchase! | optional combustion air pipe adapter, your XFyre is | and brass fitted with male pipe thread connections. | |
2. High Voltage Wiring Box | ready for direct vent. For factory installation, order | The flow switch is fully contained within the cabinet, | |
(option | protecting it from the elements and boiler room | ||
120VAC main incoming power connections. Boiler |
| mishaps. Servicing of the Flow switch can be done | |
pump wiring and DHW pump wiring. Alarm power | 6. Rating Plate Location | from the top or left side. | |
out. | 7. Gas Valve and Boiler Control | 9. Removable Air Filter | |
3. Gas Inlet | |||
Raypak uses | Simple front access; just remove the front door. The fil- | ||
The XFyre will operate at 100% full rate with gas pres- | valves, considered the finest modulating gas valves | ter just slides right out for quick and easy inspection | |
sures as low as 4.0”w.c. | produced today. To the right of the gas valve is the | and replacement. The high capacity filter is rated | |
4. Condensate Drain and Trap | boiler computer control center, which always keeps the | MERV 8. | |
blower, gas valve, direct spark ignition and flame |
| ||
supervision in perfect harmony. |
| ||
Inset photo shows condensate trap, overfill sensor and |
|
| |
pressure switch for the flue. Raypak offers optional |
|
| |
condensate neutralizer kits (option |
|
| |
plumbed between the heater and the drain. |
|
|
1 |
| 9 |
|
|
|
|
|
|
|
|
|
|
|
|
| Remove Front Door | Loosen | Pullout filter media | ||
4 | FRONT ACCESS INTAKE AIR FILTER |
|
