Assembly instructions
qAttaching the Handlebar
Tools Required: 5 mm Allen Wrench
1 Using a 5 mm Allen wrench, loosen the bolts on the collar clamp and slide clamp upward on the handlebar. With a twisting motion, push the handlebar onto the fork until it bottoms out on the fork headset lock nut.
2 With the front wheel pointed straight ahead, the handlebars square to the front wheel and the Razor logo facing the front, tighten the clamp as shown. Alternately tighten each bolt until securely tightened.
WARNING: Failure to properly install and tighten the clamp may cause the rider to lose control and fall. If you are having difficulty understanding these instructions, please contact Razor Customer Service for assistance.
qInflating Tires
The tires are inflated when shipped, but it invariably may lose some pressure between the point of manufacturing and your purchase. Always inflate tire to the correct PSI before first time use.
1 Using a
WARNING: Inflate the tires to the recommended pressure (60 PSI) before riding. Do not exceed the tires’ PSI rating. Over inflation will cause a rupture and under inflation may cause additional wear on the tire.
3
