TOOLS REQUIRED FOR PROPER ASSEMBLY
13mm box wrench or adjustable wrench
1. Assembly Instructions
WARNING: Failure to properly install and tighten the handlebar T- tube and front fork clamp may cause the rider to lose control and fall. Assembly must be performed by an adult with mechanical experience. If you do not understand these instructions or the concept of “tighten securely” seek the assistance of a qualified mechanic.
ASSEMBLY INSTRUCTIONS:
A.Slide metal washer (B) over the fork tube (A). Slide the fork tube into the steering column (G) until the metal washer seats against the preinstalled plastic steering bushing (C).
B.With the front wheel pointed straight ahead (and the slot in the fork facing the scooter), slide the clamp assembly (E) onto the fork tube. Align the open end of the clamp with the slot in the fork as shown in H.
C.Slide the plastic clamp cover (F) up the
D.Secure the handlebars by tightening the clamp nut using a 13mm wrench Tighten securely, but note that the nut is designed to prevent over- tightening. Slide the plastic cap down over the clamp bracket to prevent injury.
E.Place the foam for handlebar pad onto handlebar and wrap and secure the the cover with the velcro strips.
2. Razor Jr. Safety Tips
A. Kids under 8 year of age shouldn’t ride the RAZOR Jr. without adult supervision. The Razor Jr. is not recommended for children under the age of 3.
F
DE
G
C
B
A
B
H
4 | 5 |
