Installation

As mentioned earlier in this manual, the bracket has the ability to be mounted a variety of different ways. To elaborate on this, it may be mounted with either nails or screws, horizontally or vertically. There is a hole in the center of the bracket to allow speaker wire through so it may be properly attached to the speaker.

You will notice two corner support brackets included in the packaging. These slide into the corners of the bracket and are attached with the stailess steel machine screws provided. We recommend these extra brackets be used anytime the speakers are mounted to a structure that creates motion (such as a boat or R.V.) or when any type of reinforcement is needed.

It is best to consult your local RBH dealer or installer with any further ques-

Mounting & Connections

A. The AWS-6can be mounted either horizontally or vertically. Hold the bracket against the mounting surface, so you can mark the locations of the mounting holes, and the wire hole (see Parts Guide).

B. Drill corresponding pilot holes for the included mounting screws or nails (not included), and a hole large enough for speaker wire to pass through.