Installing the Speaker
1.Determine where each speaker cabinet will need to be installed.
2.If the cabinet is installed in a vertical position, the terminal cup will need to be on the top (see figure 1).
3.Position and brace the speaker cabinet in- between two studs by using a couple of screws to hold the speaker in place
(see figure 2).
NOTE: The front of the cabinet should be flush with the front of the studs.
4.Using the included wood screws, secure both sides of the speaker as shown in figure 3. Use a minimum of three screws per side to secure the cabinet.
OPTIONAL: Use construction adhesive between the speaker cabinet and studs to secure the speaker in place.
6.Connect speaker wire to the terminal plate.
7.If the cardboard debris shield was removed during the process of installing the speaker wire, replace it (see figure 4).
8.With the speaker wire ran and the cabinet secured between the studs the drywall can now be installed.
IMPORTANT: To avoid vibrations between the drywall and the speaker cabinet use construction adhesive and adhere the drywall to the speaker cabinet and studs for stability.
Left Surround
Left Rear
Figure 1
Figure 2
Figure 3
6
Figure 4
