Connections & Setup
Explanation of Jacks
This section describes the jacks you can use to make connections. There are several ways to connect components to your TV.
TV ANT Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or if using the example on page 4, a VCR.
VIDEO 1
Pr Pb Y
R | L/MONO | |
AUDIO | VIDEO | |
R | L | AUDIO OUTPUT |
|
|
VIDEO 1
Lets you connect a component such as a VCR, DVD player, or laserdisc player.
¥Y, Pb, Pr Provides optimum picture quality because the video is separated into three signals. Use three video- grade cables for the connection. When using VIDEO 2
Y, Pb, Pr, make sure to connect left and right audio cables to the VIDEO 2 AUDIO Input jacks.
¥R (RIGHT) AUDIO Provides right audio connection. The right audio connector is usually red.
¥L/MONO AUDIO Provides left audio connection. The left audio connector is usually white.
¥VIDEO Provides composite video connection. The video connector is usually yellow.
¥
AUDIO OUTPUT (Not available on model 27R430T) Lets you connect an amplifier or audio receiver for improved sound quality.
Chapter 1 | Graphics contained within this publication are for representation only. | 5 |
