FIRST THINGS FIRST

USING THIS MANUAL

There are a couple of conventions used in this manual that might help you read it.

Words that appear in ALL CAPS indicate the name of a button.

The names of on-screen menu options are shown in italics.

IMPORTANT NOTE ABOUT THIS USER’S

MANUAL

This manual assumes that your digital satellite system has been installed, meaning:

1.The satellite dish antenna has been installed, correctly pointed at the satellite, and connected to your digital satellite receiver.

2.The digital satellite receiver is connected to your television and to a telephone line.

3.The access card is installed in your digital satellite receiver.

Your access card has been matched to your receiver, and should already be installed when you take the receiver out of the packing box. The access card should only be taken out of the receiver when you are issued a new card by your programming providers.

4.The remote control has batteries and can be programmed to control both your digital satellite receiver and your TV (if your TV is remote-controllable).

If your system has not been installed, refer to the satellite dish Installer's Guide for information regarding proper installation. Then, refer to the next section, Connecting Your Receiver to Your TV. See your dealer for specific information regarding professional installation or the purchase of a Self-Installer’s Kit.

6

Page 8
Image 8
RCA 1998 manual Using this Manual, Important Note about this USER’S Manual