RCA 2-9120/2-9130 Modular Jack Requirements, Wall Mount Installation, Flash, Temporary Tone

FOLD FOLD FOLD

MODULAR JACK REQUIREMENTS

You need an RJ11 type modular jack, which is the most common type of phone

WALL MOUNT INSTALLATION

1a. If the modular phone jack is in the base plate on the wall

USING THE TELEPHONE FEATURES

1a AUTOMATIC REDIAL

jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone company to find out how to get one installed.

INSTALLATION

DESKTOP OR TABLETOP INSTALLATION

1 2

where you're going to mount your phone, just plug the telephone line cord into the jack; mount the phone on the posts; and set the RINGER switch and PULSE/ TONE switch (described in detail below).

2

3

To automatically redial the last number you called:

1.Pick up the handset to get a dial tone.

2.Press REDIAL.

FLASH

Press the FLASH button instead of the hook switch to activate custom calling services such as call waiting or call transfer. Custom calling services are provided by the phone company.

TEMPORARY TONE

ABC DEF

1 2 3

GHI JKL MNO

4 5 6

PRS TUV WXY

7 8 9

TONE OPER

* 0 #

flash0000 redia0000 l

3		4
ON	OFF
RINGER	TONE	PULSE

1.Remove telephone line cord from the pocket on the bottom of the phone.

2.Run telephone line cord through the guides on the bottom of the phone.

3.Connect the telephone line cord to a modular telephone jack.

4.Slide the RINGER switch (on the side of the handset) to ON.

5.Set PULSE/TONE switch (on the side of the handset) to TONE for touch-tone service, or set it to PULSE for rotary service.If you don’t know which type of service you have, check with the phone company.

1b. If the modular phone jack is near the floor and you want to mount the phone on the wall, remove the telephone line cord from the pocket that is on the bottom of the phone. Wrap the phone cord around the circular guide on the bottom of the phone.

2.Plug telephone line cord into the modular jack.

3.Slip mounting holes on the bottom of the telephone over the wall plate posts and slide the base down until the phone is firmly in place. (Wall plate is not included.)

4.Slide the RINGER switch (on the side of handset) to ON.

5.Set PULSE/TONE switch (on the side of the handset) to TONE for touch-tone service, or set it to PULSE for rotary service.If you don’t know which type of service you have, check with the phone company.

Telephone line cord

	1	2	3
	4	5	6
7	8	9
*	0	#

1b	If you have pulse service, you can temporarily change from pulse to tone service in order			REDIAL
	to access services that require tone dialing (such as getting information from a local bank).			button
	After dialing the telephone number, press and release the tone button, marked with an			FLASH
	asterisk (*). When you hang up, your phone telephone returns to pulse service.
				button
	SERVICE
Mounting
holes
	FCC requires this product to be serviced only by the manufacturer or its authorized service agents. In accordance with
	FCC requirements, changes or modifications not expressly approved by Thomson Consumer Electronics could void the
	user’s authority to operate this product. For instructions on how to obtain service, call 1-800-448-0329.
	Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or
Coiled	received as a gift. This information will be valuable if service should be required during the warranty period.
handset	Purchase date ________________________________		Name of store _______________________________
cord
	TROUBLESHOOTING TIPS
	Problem	Solution
	No dial tone.	• Check hook switch to make sure it pops up.
	Won't dial out	• Make sure PULSE/TONE is set to correct position.
4	Phone doesn’t ring	• Make sure RINGER switch is set to ON.

• You might have too many phones on one line.

	Feedback when	• This is normal. Power fluctuates with phone outpulsing.
5	dialing in PULSE mode.
	Can’t be heard by	•	Make sure phone cord is securely plugged in.
	other party	•	Make sure other phones aren't off the hook at the same time you're using the phone. It is

normal for the volume to drop when additional phones are used at the same time.

2 3

FOLD

2-9120 (Folded size 80 x 175 mm)

20724660

Sheet 2 0f 2 (Double-side printing with 3 Folds)

	4		5
FOLD		FOLD