APPENDIX A: HANDSET SOUND SIGNALS
Signal | Meaning |
Three long beeps | Page signal |
A long warbling tone (with ringer on) | Signals an incoming call |
Four short beeps | Out of range warning |
|
|
APPENDIX B: TROUBLESHOOTING GUIDE
In case of difficulty, please check the following Troubleshooting Guide before seeking service.
Problem | Solution |
No dial tone | • Check installation: |
| — Is the base power cord connected to a working |
| outlet? |
| — Is the Phone in Use light on? |
| — Is the telephone line cord connected to the base |
| unit and the wall jack? |
| • Disconnect the base from the wall jack and connect |
| another phone to the same jack. If there is no dial tone |
| in the second phone, the problem might be your |
| wiring or local service. |
| • Is the handset out of range of the base? |
| • Make sure the battery is properly charged (12 hours). |
| • Is the battery pack installed correctly? See page 8. |
| • Did the handset beep when you pressed the phone |
| button? Did the Phone in Use light come on? The |
| battery may need to be charged. |
| • Reset the security code by placing the handset in the |
| base for about 20 seconds. |
|
|
10
