Connections & Setup
Display Contrast
Adjust the display contrast to one of four contrast levels.
1.Press the MENU button while in standby mode.
2.Use the < REVIEW > button to scroll to SET LCD CONTRAST.
3.Press the SELECT/SAVE button. The MIN and MAX contrast scale shows on the display.
4.Use the < REVIEW > button to adjust the contrast. The display instantly adjusts with each press of the < REVIEW > button.
5.Press the SELECT/SAVE button to save the desired contrast level.
Local Area Code (Not applicable to model 25413)
1.Press the MENU button while in standby mode.
2.Use the < REVIEW > button to scroll to SET AREA CODE.
3.Press the SELECT/SAVE button.
4.Use the < REVIEW > button to scroll to LOCAL AREA CODE.
5.Press the SELECT/SAVE button. Enter Number shows in the display.
6.Use the touch tone pad on your phone to enter your local area code.
7.Press the SELECT/SAVE button to save.
NOTE: If you make a mistake, press DELETE to erase the wrong digit.
Regional Area Codes (Not applicable to model 25413)
Depending on your location, you may need to set up to six regional area codes. Setting Regional Area Codes helps the phone determine the number format to display when a valid CID record is received. Call records matching any of the set regional area codes are displayed as 10 digits.
NOTE: If the CID telephone number does not display correctly, you may not be able to dial back the number from the Caller ID menu.
You may need to set regional area codes if you reside in an area which:
•uses multiple area codes
•uses overlapping area codes
•requires
1.Press the MENU button while in standby mode.
2.Use the < REVIEW > button to scroll to SET AREA CODE.
3.Press the SELECT/SAVE button.
4.Use the < REVIEW > button to scroll to REGIONAL AREA CODES.
5.Press the SELECT/SAVE button. All six regional area code fields and Enter Number show in the display.
6.Use the touch tone pad on your phone to enter up to six regional area codes.
7.Press the SELECT/SAVE button to save.
NOTE: If you make a mistake, press the DELETE button to erase a wrong digit.
Manually Setting the Time and Date
The time and date is automatically set when you receive the first CID call. To manually reset the time and date, follow the steps below.
NOTE: Automatic time set not applicable to model 25413.
1.Press the MENU button while in standby mode.
2.Use the < REVIEW > button to scroll to SET TIME & DATE.
3.Press the SELECT/SAVE button.
4.Use the < REVIEW > button to scroll to SET CLOCK.
5.Press the SELECT/SAVE button, and the cursor moves to the hour field.
6.Use the < REVIEW > button to select the hour.
NOTE: AM or PM will be set accordingly with selected hour
7. Press the SELECT/SAVE button, and the cursor moves to the minute field.
11
