RCA 26925 manual Slip the mounting holes over the wall

6. Slip the mounting holes over the wall 7 6

plate posts and slide the unit down firmly into place. (Wall plate not included.)

7.Set theT/P switch toT if you have touch-tone service or to P (pulse) if

you have rotary dial service.

8. Set the RING switch to ON so the handset rings for incoming calls.

9.Plug the power supply adapter into an AC outlet and raise the antenna.

10.Place the handset in the base to

charge for 12 hours.The CHARGE/	9
PAGE indicator comes on. If you don’t
charge the handset battery properly
(for 12 hours) when you first set up	8
the phone, the battery’s long-term
performance will be compromised.	10
	LINE 1
	LINE 2
	CHARGE
	PAGE
	PAGE

CAUTION: Use only the ATLINKS USA power supply 5- 2445(white)/ 5-2446(black)that is compatible with this unit. Using other adapters may damage the unit.

12