26930
INTRODUCTION
Your Caller ID phone stores and displays specific information, provided by your local telephone company, to subscribers of Caller ID or similar caller identification services.You must subscribe to one of these services in order to use this unit.
Your Caller ID phone enables you to:
INSTALLATION
DESKTOP INSTALLATION
NOTE: For desktop charging only, the handset is able to charge facing up or down.
5.After charging, plug the telephone line cord into the modular jack. Then stuff the excess line cord into the mounting bracket.
6.Attach the wall
mount bracket by | 8 | 7 |
inserting the two |
|
|
tabs at the top |
|
|
and then |
|
|
snapping the tab |
|
|
CHANNEL BUTTON
While talking, you might need to manually change the channel in order to get rid of static. Press and release the CHANNEL button to advance to the next clear channel.
TEMPORARY TONE
This feature enables Pulse (rotary) service phone users to
Time | Date | Number of calls |
10:28 PM 10/20 REPT CALL # 03
3175551234
FRED PAGE
DIALING A CALLER ID NUMBER
1.Make sure the phone is OFF.
2.Use the arrow buttons to display the desired Caller ID record.
3.Press CALL BACK. The number dials automatically.
SETTING YOUR LOCAL AREA CODE
•Identify callers before you answer the phone.
•View the time and date of each incoming call.
•Record up to 40 Caller ID messages sequentially.
•Know who called while you were away.
To get the most from your new phone, we suggest that you take a few minutes right now to read through this user's guide.
IMPORTANT: In order to use this unit, you must subscribe to either the standard Name/Number Caller ID Service or Caller ID with Call Waiting Service. To know who is calling while you are on the phone, you must subscribe to Caller ID with Call Waiting Service.
2
1
3
4
5
at the bottom into | 6 | 5 |
place. |
| |
|
|
7. Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)
8.Raise the base antenna.
NOTE : The phone automatically defaults to touch- tone dialing. To change to pulse (rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type of service you have, check with the phone company.
access
1.Call the bank’s information line.
2.Press the TONE button (*) after your call is answered.
3.Follow the voice instructions to complete your transaction.
4.Hang up when finished. The phone returns to Pulse (rotary) service.
FINDING THE HANDSET
This feature helps to locate a misplaced handset.
Press the PAGE button on the base.The handset beeps continuously for about 2 minutes or until you press any button
Caller ID phone number | Caller ID name |
CALLER ID WITH CALL WAITING
Provided you subscribe to Caller ID with Call Waiting service from your phone company, you are able to see who is calling when you hear the call waiting beep.The caller identification information appears in the display after you hear the tone.
• Press the FLASH button to put the current person on |
hold so that you can answer the incoming call. |
IMPORTANT: In order to use this unit, you must |
subscribe to either the standard Name/Number Caller |
ID Service or Caller ID with Call Waiting Service. To |
1.Press and hold the CHANNEL button until “AREA CODE=000” shows in the display.
2.Use the handset numberpad to enter your
NOTE: To clear your local area code, press and hold the CHANNEL button until your area code appears in the display, then press 000.
CHANGING THE NUMBER FORMAT
The FORMAT button lets you change the format of the displayed number. The available formats are as follows.
We bring good things to life.
FCC REGISTRATION INFORMATION
Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68, FCC Rules and Regulations.
1 Notification to the Local Telephone Company |
On the bottom of this equipment is a label indicating, among other |
information, the FCC Registration number and Ringer Equivalence |
Number (REN) for the equipment.You must, upon request, provide |
this information to your telephone company. |
The REN is useful in determining the number of devices you may |
connect to your telephone line and still have all of these devices |
ring when your telephone number is called. In most (but not all) |
areas, the sum of the RENs of all devices connected to one line |
should not exceed 5. To be certain of the number of devices you may |
connect to your line as determined by the REN, you should contact |
your local telephone company. |
IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out.
|
|
|
|
|
| |
|
|
| CAUTION: |
|
| |
|
|
| RISK OF ELECTRIC SHOCK |
|
| |
|
|
| DO NOT OPEN |
|
| |
| THE LIGHTNING FLASH | CAUTION: TO REDUCE THE RISK OF | THE EXCLAMATION | |||
| AND ARROW HEAD | ELECTRIC SHOCK, DO NOT REMOVE | POINT WITHIN THE | |||
| WITHIN THE TRIANGLE | COVER (OR BACK). NO USER | TRIANGLE IS A | |||
| IS A WARNING SIGN | SERVICEABLE PARTS INSIDE. REFER | WARNING SIGN | |||
| ALERTING YOU OF | SERVICING TO QUALIFIED SERVICE | ALERTING YOU OF | |||
WARNING:TO PREVENT FIRE OR | “DANGEROUS | PERSONNEL. | IMPORTANT | |||
VOLTAGE” INSIDE THE |
|
|
| INSTRUCTIONS | ||
ELECTRICAL SHOCK HAZARD, DO | PRODUCT. |
|
|
| ACCOMPANYING THE | |
|
|
|
| PRODUCT. | ||
NOT EXPOSETHIS PRODUCT TO |
|
|
|
|
| |
SEE MARKING ON BOTTOM / BACK OF PRODUCT | ||||||
RAIN OR MOISTURE. | ||||||
|
|
|
|
| ||
BEFORE YOU BEGIN
PARTS CHECKLIST
Make sure your package includes the items shown here.
10:28 | 10/20 | 03 |
|
| 3175551234 |
| |
| FRED PAGE |
| |
TALK |
|
|
|
1 | 2 | 3 | Mounting bracket |
CHARGE/ IN USE | 5 | 6 | |
4 |
| ||
7 | 8 | 9 |
|
* | 0 | # |
|
PAGE
BaseHandset
Belt clip
MODULAR JACK REQUIREMENTS
1.Place the handset in the base.
2.Raise the base antenna.
3.Plug the power supply cord into an AC outlet.The CHARGE/IN USE indicator comes on indicating that the battery is charging.
Allow the phone to charge for 12 hours prior to first use. If you don't properly charge the phone, battery performance will be compromised.
4.After charging, plug the telephone line cord into the modular jack.
5.Set the RINGER switch on the handset to ON.
NOTE : The phone automatically defaults to touch- tone dialing. To change to pulse (rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type of service you have, check with the phone company.
WALL MOUNT INSTALLATION
Because it is necessary to charge the handset for 12 hours prior to connecting the phone for use the first time, it is better to leave the unit on a flat surface during initial charge before attempting to hang it on the wall.
1 | 3 | 2 |
|
TALK | 10:28 PM 10/20 REPT CALL # 03 | VOLUME | |||
button |
| 3175551234 | button | ||
|
| FRED PAGE |
| ||
|
| VOLUME |
| ||
| TALK |
|
|
| |
|
| CID REVIEW |
| ||
| 1 | ABC 2 | DEF 3 |
| |
TONE | GHI 4 | JKL 5 | MNO 6 |
| |
|
|
|
| ||
button | PQRS 7 | TUV 8 | WXYZ9 |
| |
CALL BACK/ | TONE * | OPER 0 | # | FORMAT | |
CALL BACK |
|
| |||
REDIAL | MEMORY | FORMAT | button | ||
REDIAL button | |||||
|
| DELETE |
| ||
| CHANNEL | OFF ON |
| ||
|
| FLASH |
| ||
|
| RINGER |
| DELETE/ | |
|
|
|
| ||
|
|
|
| FLASH | |
CHANNEL |
|
|
| button | |
button |
|
|
|
| |
| MEMORY | RINGER |
| ||
| button |
| switch |
| |
CORDLESS PHONE BASICS
on the handset.You can also press PAGE again to cancel.
NOTE: The ringer does not have to be on for this feature to work.
RINGER SWITCH
The RINGER switch must be ON for the handset to ring during incoming calls.
TONE/PULSE DIALING
This adjustment allows you to select tone
TONE
1.Make sure the phone is OFF.
2.Press and hold the CHANNEL button for 2 seconds until the phone beeps.
3.Press TONE*.
PULSE
1.Make sure the phone is OFF.
2.Press and hold the CHANNEL button for 2 seconds until the phone beeps.
3.Press #.
VOLUME
The VOLUME button controls the volume of the handset's earpiece.
know who is calling while you are on the phone, you |
must subscribe to Caller ID with Call Waiting Service. |
RECEIVING AND STORING CALLS
When you receive a call, the information is transmitted by the phone company to your Caller ID telephone between the first and second ring.
When the memory is full, a new call automatically replaces the oldest call in memory. NEW appears in the display for calls received that have not been reviewed.
NOTE: Check with your local phone company regarding name service availability.
REVIEWING RECORDS
As calls are received and stored, the display is updated to let you know how many calls have been received.
•Press the arrow down button to scroll through the call records from the most recent to the oldest.
•Press the arrow up button to scroll through the call records from the oldest to the newest.
•To display the last Caller ID record reviewed, make sure the phone is OFF.Then press REDIAL.To dial the number, press REDIAL again. The number dials automatically.
DELETING RECORDS
Use the DELETE button to erase the record currently shown in the display or all records.
DELETING THE CURRENT RECORD
1.Use the arrow buttons to scroll to the number you want to call back.
2.If the number will not dial as shown, press the FORMAT button. Repeat if necessary, until the correct number of digits are shown.
3.Press CALL BACK. The number dials automatically.
MEMORY
Store up to ten
STORING A NUMBER IN MEMORY
1. | Make sure the phone is OFF. |
2. | Press the MEMORY button. |
3. | Press the memory location number |
4. | Press MEMORY again. The display shows ENTER NAME. |
| NOTE: If you don't want to enter the name, skip step 5. |
5. | Use the keypad to store a name (up to 15 characters). |
| More than one letter or character is stored in each of the |
| number keys. For example, to enter Joe Smith, press 5 |
| for J; press 6 three times for O; press 3 two times for E; |
| press 1 to enter a space before you start entering the |
| last name; press 7 four times for S; press 6 for M; press |
Notes |
• This equipment may not be used on coin service provided by the |
telephone company. |
• Party lines are subject to state tariffs, and therefore, you may not |
be able to use your own telephone equipment if you are on a |
party line. Check with your local telephone company. |
• Notice must be given to the telephone company upon |
permanent disconnection of your telephone from your line. |
2 Rights of theTelephone Company |
Should your equipment cause trouble on your line which may |
harm the telephone network, the telephone company shall, where |
practicable, notify you that temporary discontinuance of service |
may be required. Where prior notice is not practicable and the |
circumstances warrant such action, the telephone company may |
temporarily discontinue service immediately. In case of such |
temporary discontinuance, the telephone company must: (1) |
You need an RJ11 type modular phone jack, which is the most common type of phone jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone company to find out how to get one installed.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause interference to nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave oven, or VCR. If
4
1. Remove the handset hook; turn it upside down, and put |
it back in the slot.You need to do this so the handset |
doesn't fall out of the base when it is on the wall. |
RECEIVING A CALL
1.Check the display to see who is calling.
2.Press the TALK button.
MAKING A CALL
To make a call, press the TALK button before you dial and press it again to hang up.
REDIAL
VOICE MESSAGING
Provided your phone company offers voice messaging service and you subscribe to it, the CHARGE/IN USE indicator on the base flashes when the phone is not in use to indicate there is a message waiting. It stops flashing after the message has been reviewed.
CHARGE/ IN USE
PAGE
CHARGE/IN USE indicator
1.Make sure the phone is OFF.
2.Use the arrow buttons to display the desired Caller ID record.
3.Press DELETE.The display shows ERASE CALL ID?
4.Press DELETE again to erase the record.
DELETING ALL RECORDS
1. | Make sure the phone is OFF. |
2. Use the arrow buttons to display the desired Caller ID record. | |
3. | Press and hold DELETE.The display shows ERASE ALL? |
| 4 three times for I; press 8 forT; and 4 two times for H. |
| If you're using two letters consecutively that are stored |
| in the same number key, you must press FORMAT |
| between the letters. For example, if you enter Barb, |
| press 2 two times for B; press FORMAT; press 2 for A; 7 |
| three times for R; and 2 two times for B.You need to |
| press FORMAT between the B and the A since they are |
| stored within the same number key. |
6. | Press MEMORY.The display shows ENTERTEL NUMBR. |
7. | Use the keypad to enter the number you want to store |
| (up to 24 digits).To add a pause, See “Inserting a Pause |
promptly notify you of such temporary discontinuance; (2) afford |
you the opportunity to correct the situation; and (3) inform you of |
your right to bring a complaint to the Commission pursuant to |
procedures set forth in Subpart E of Part 68, FCC Rules and |
Regulations. |
The telephone company may make changes in its communications |
facilities, equipment, operations or procedures where such action |
is required in the operation of its business and not inconsistent |
with FCC Rules and Regulations. If these changes are expected to |
affect the use or performance of your telephone equipment, the |
telephone company must give you adequate notice, in writing, to |
allow you to maintain uninterrupted service. |
| ATLINKS USA, Inc. | |
Model 26930C/D | 10330 North Meridian Street | |
Indianapolis, IN 46290 | ||
15574080 (Rev. 3 DOM E) | ||
© 2001 ATLINKS USA, Inc. | ||
Trademark(s) ® Registered | ||
Printed in China | Marca(s) ® Registrada(s) |
such interference continues, move the cordless telephone farther away from these appliances.
DIGITAL SECURITY SYSTEM
Your cordless phone uses a digital security system to provide protection against false ringing, unauthorized access, and charges to your phone line.
When you place the handset in the base, the unit verifies its security code. After a power outage or battery replace- ment, you should place the handset in the base for about 20 seconds to reset the code.
2. | Set the RINGER switch on the handset to ON. |
3. | Place the handset in the base. |
4. | Plug the power supply into an AC outlet. |
The CHARGE/IN USE indicator comes on indicating that the battery is charging.
Allow the phone to charge for 12 hours prior to first use. If you don't properly charge the phone, battery performance will be compromised.
While the phone is on, press the REDIAL button to redial the last number you dialed (up to 32 digits). If you get a busy signal, and want to keep dialing the number, just press REDIAL again (you don't have to turn the phone off and back on).
FLASH
Use the FLASH button to activate custom calling services such as call waiting or call transfer, which
are available through your local phone company.
TIP: Don’t use the TALK button to activate custom calling services such as call waiting, or you’ll hang up the phone.
CALLER ID FEATURES
This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time.The unit can store up to 40 calls for later review.
4. Press DELETE again to erase all records. |
in the Dialing Sequence”. |
8. Press MEMORY again to store the number. |
