14
CAUTION: To reduce risk of personal injury,
re, or damage use only the 5-2784 power
adaptor listed in the user’s guide. This power
adaptor is intended to be correctly orientated
in a vertical or oor mount position.
5. You can stretch out the kick-stands on the bottom of the
base for a better viewing angle when placed on desktop.
6. Connect one end of the coiled handset cord to the jack on
the handset.
7. Plug the other end of the coiled handset cord to the jack
on the base.
8. Make sure the DESK/WALL MOUNT tab is rotated to the
DESK position and place the handset into the cradle.
9. Adjust the RINGER VOLUME switch to the desired setting:
HI, LOW or OFF.
The unit is properly installed if you pick up the handset and
hear the dial tone. If you don’t hear a dial tone recheck all
the installation steps.