Chapter 1: Getting Started
ANTENNA, CABLE, CABLE BOX OR VCR
ANTENNA
TV (Back Panel)
ANTENNA
ANTENNA IN FROM TV
RF
MODULATOR
CABLE |
|
|
|
OR | ANT IN | V | R L |
| |||
|
|
| |
SIGNAL |
| TO TV |
|
|
|
|
DVD
PLAYER
|
| DIGITAL AUDIO OUT |
|
VIDEO OUT | AUDIO OUT | COAXIAL |
|
| R | Y | |
| L | ||
1 | 1 |
|
|
| R | OPTICAL | PB |
| L |
| |
2 | 2 | PR | |
|
|
Important Stand and Base Safety Information
Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage the TV.
Connect your TV
Two possible connections are shown below.
Connect the cable from your cable system or
DVD Player + TV with RF modulator
Use the RF modulator (included with AC power supply) to connect your DVD player. (The example shows jacks on one side of the RF modulator for reference. The modulator actually has jacks on both sides.)
1.Connect the audio cables to the AUDIO OUT jacks on the back of your DVD player and to the corresponding Audio Input jacks on the RF modulator.
2.Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD player to the Video Input jack on the RF modulator.
3.Connect the RF modulator to the back of the TV.
4.Connect the cable from your cable system or
ANTENNA IN FROM TV
on the RF modulator.
5. | Select channel 3 or 4 on the RF | RF |
|
|
|
|
|
|
|
| |
| modulator. When you turn the TV on, the | MODULATOR |
|
|
|
|
|
|
|
| |
| RF modulator will automatically detect | ANT IN | V | R | L |
| your cable input for the TV. Channel 3 or | TO TV |
|
| 008 |
|
|
|
|
| Am |
| 4 (which ever you choose) will play your |
|
|
|
|
| movie. |
|
|
|
|
Graphics contained within this publication are for representation only. Your unit might differ slightly. | 1 |