Mounting the Antenna to the Wall
Once you’ve confirmed the best location for your antenna and scanned for channels, you’re ready to mount the antenna to that location, using the mounting strips included. If you decide to move the antenna after you’ve mounted it, no problem: the mounting strips detach from the wall easily, without harming your wall’s surface, and are easily replaceable at most retail and drug stores.
Caution: DO NOT use the mounting strips with wallpaper. The mounting strips may not adhere well to vinyl surfaces. Apply to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
Note: The antenna also has two holes along its top edge for hanging it using screws or tacks (not included).
To mount the antenna using the mounting strips:
1.Clean the surface of the location with isopropyl rubbing alcohol. Wipe gently, then let the area dry.
Important: Do not use household cleaners.
2.While the area is drying, separate the mounting strips. Snap them apart
3.Remove the red liner. Press the adhesive strip onto one of the top corners of the back of the antenna. Repeat for the other top corner. Then place a single mounting strip on the metal section in the bottom middle of the antenna, with the strip facing down.
English
5
