Recording
Warning 
The video light and bulb need to cool for approximately 30 minutes after the camcorder has been used before the bulb assembly is replaced.
Do not touch the light bulb with your fingers. If the bulb is accidentally touched, wipe it with a soft cloth. A dirty bulb may cause smoke and have a reduced service life.
Video Light Details
Even if the battery indicator (
) does not blink due to low battery charge, the camcorder may turn off automatically when you turn on the video light, or if the video light is turned on when you start a recording.
•When LIGHT OFF/AUTO/ON switch is set to AUTO:
•The video light may keep turning on and off depending on the lighting conditions. If this happens, manually switch the light ON or OFF using the LIGHT OFF/AUTO/ON switch.
•If Slow Shutter mode is turned on, the video light is likely to stay on.
•While in Twilight mode, the light will not activate.
•To replace the video light, It is recommended that you consult your nearest camcorder dealer.
Video Light
44