Playback
Connecting the Camcorder to a Computer Using IEEE 1394 Jacks
DV IN/OUT
Connection Jack
Connector Cover
(Open when connecting cables)
IEEE 1394
Connection
COMPUTER
IEEE 1394 Connection Jack (Note: Most computers with IEEE 1394 capabilities have the jack on the rear of the CPU)
Connecting the Camcorder to a Computer Using an IEEE 1394 Jack
It is also possible to transfer video and still images to a computer equipped for digital video capture using an IEEE 1394 board.
1.Locate the IEEE 1394 cable that came with the camcorder.
2.Make sure the camcorder and computer are turned off.
3.Connect one end of the IEEE 1394 cable to your computer.
4.Connect the other end of the IEEE 1394 cable to the camcorder’s DV IN/OUT jack.
5.Press in the Thumb Lock and rotate the Power Switch to playback (
) mode.
6.Turn on the computer.
7.Follow your computer’s video capture software instructions to upload the camera’s data to the computer.
8.Press the camcorder’s Play/Pause Button ( / 
) to begin playback.
Notes:
It is recommended to use the AC Adapter/ Charger as the power supply instead of the battery pack for uniform playback.
Date and time information cannot be captured to a computer.
When using a DV cable, be sure it has a core filter attached. The core filter reduces interference and is required to meet FCC standards.
53