Playback
Connecting the Camcorder to a VCR to Capture Sound Only
A/V Jack
VCR
Connector cover
(Open when connecting cables) 
A/V Connection Cable
(Included with Camcorder)
White Plug
(L AUDIO IN)
| A/V Jacks |
L AUDIO IN R AUDIO IN VIDEO IN | (Note: Can be on |
| front or rear of VCR) |
Yellow Plug
(NOT Connected)
Red Plug
(R AUDIO IN)
Dubbing Sound to a VCR Using A/V Input Jacks:
1.Locate the A/V cable that came with the camcorder.
2.Make sure all units are turned off.
3.Connect the white plug of the A/V cables to the VCR’s Left AUDIO IN jack (L AUDIO IN).
4.Connect the red plug of the A/V cables to the VCR’s Right
AUDIO IN jack (R AUDIO IN).
Note: Some VCRs do not offer both left and right audio jacks. If your TV only has one audio jack, use the A/V cable’s white plug for audio.
7.Connect the A/V Connection Cable’s single plug into the camcorder’s A/V Jack.
8.Press in the Thumb Lock and rotate the Power Switch to playback (
) mode.
9.Turn on the VCR.
10.Tune the VCR to its video input channel to hear the recording.
11.Start the VCR’s record mode.
12.Press the camcorder’s Play/Pause Button ( / 
) to begin playback.
6.Open the camcorder’s Connector Cover.
54