DBS_D940_IB.QXD 11/5/01 10:27 AM Page 6
Base Unit Set-Up
Where to Use.
Use in the room where the DBS
Receiver is located.
How to Set-Up
1.Plug the Base Unit power cord into standard electrical outlet.
2.Point the front of the Unit (logo side) facing the DBS Receiver. Extend the antenna
for best performance.
3.Check the following distances
•Base Unit is within 20 ft. of DBS Receiver.
•Base Unit is within 100 ft. of Extension Unit.
DBS DISH
ANTENNA DBS Receiver
Base Unit
After setting up your Extension and Base Units, operate the Signal Sender by aiming your remote at the RCA logo on the front of the Extension Unit.
6