2. Connecting to your TV
How you connect your RF Modulator to your TV depends on what RF input your TV offers. Look at the back panel of your TV to see which of the following best matches the connections it offers. Then, follow the directions for that connection.
Something else connected to the TV’s RF jack (like an antenna, VCR, or cable signal)
Your TV has only 300-ohm VHF screw terminals
Use a |
A/V Cable
ANTENNA /CABLE
VHF/UHF
TV
VHF/UHF
1. Disconnect the cable connected to the TV’s RF input.
2.Reconnect this cable to the RF Modulator’s ANT IN jack.
3.Connect a coaxial cable between the TO TV VHF/UHF jack on the RF Modulator and the RF input on your TV.
| Matching Transformer | ohm matching transformer |
A/V Cable | UHF | |
| ||
| TV | to make the connection. |
|
| |
| VHF |
|
RF Modulator
Nothing connected to the TV’s RF jack
A/V Cable
TV
VHF/UHF
Coaxial Cables
Connect a
RF Modulator
3. Plugging in the RF Modulator
4. Setting the CHANNEL 3/4 switch
Plug the RF Modulator’s power cord into a standard AC outlet.
Note: This power unit is intended to be correctly oriented in a vertical or floor mount position.
CHANNEL 3/4 |
1.Turn on your TV and set it to either Channel 3 or 4, whichever is not used for regular broadcasts in your area.
2.Set the RF Modulator’s CHANNEL 3/4 switch to the same channel you set the TV (3 or 4).
RF Modulator
