Limited Warranty

Advanced Playback Operations

Advanced Playback Operations

Menu System

Menu System

Title/Chapter/Time Search

1. Press the SEARCH button repeatedly to display a search option:

Press once: Title and chapter search

Press twice: Title and time search

Press three times: Chapter and time search

2.Press the 3 or 4 button to select a search option and then use the number buttons to enter the desired title, chapter (for title or chapter 5, press "0", "5") or time (hour/minutes/ seconds) values. Playback will start immediately from the title, chapter or time you have entered.

Zoom

While a disc is playing, press ZOOM (the player zooms in on the image). Each time you press ZOOM, the picture is magnified even more (until you get to the maximum zoom level). To see other parts of the picture when you’ve zoomed in on the image, try pressing the 3,4,5 and 6 buttons to go in corresponding directions. This feature is called pan and scan.

Note: Under Zoom function for JPEG file, press ZOOM button once to go to Zoom 1x mode, then press REV or FWD button repeatedly to select the zoom levels. Press ZOOM to quit the zoom mode.

Repeat Playback

While the disc is playing, press the REPEAT/A-B button repeatedly to select a play mode: DVD repeat modes: Title repeat, Chapter repeat, A-B repeat and repeat off.

CD repeat modes: current track repeat, all tracks repeat, A-B repeat and repeat off.

A-B Repeat

To repeat a segment between two points (A and B), press the REPEAT/A-B button three times at the beginning of the segment you want to repeat. Allow the disc to play to the end of the segment or use FWD to advance to the end point (B). Press the REPEAT/A-B button again at the end of the segment. The segment plays repeatedly until you press REPEAT/A-B to resume normal playback.

Audio (Only for DVD, VCD)

Some discs have several audio tracks used for different languages or different audio formats. To change the language or audio format during play, press the AUDIO button one or more times to select one of the available audio formats or languages.

Note: This option is only available if the disc offers a number of languages or formats.

Subtitle

Press the SUBTITLE button to select a subtitle language and to turn the subtitle menu on/off if your subtitle feature is available on the disc.

Display

The Display appears across the top of the screen when you press the DISPLAY button on the remote while playing a disc. Press the DISPLAY button repeatedly to scroll through the playback information.

Playback Control (PBC)

The Playback Control feature is available only on Video CDs. Press the DVD MENU/PBC button to turn the PBC feature on and off. The Playback Control feature supports the menus of the VCD format similar to a DVD menu.

HDMI

Press the HDMI button repeatedly to select the HDMI output resolution that best matches your TV.

JPEG Files

Playback of JPEG file

JPEG files are image files (make sure they have a resolution of less than 5 megapixels.) Note: The time taken for the contents of the disc to be displayed varies according to the

size and number of JPEG files actually on the disc. If nothing is displayed after a few minutes, it is likely that certain files are too large. In this case, reduce the files’ resolution to less than 5 megapixels and write another disc.

Before inserting a disc, check that it is compatible with the player:

1. Open the tray by pressing the OPEN/CLOSE button. Place a disc with the printed side facing up and close the tray. The disc’s contents are displayed.

2. Select a folder using the 5 and 6 buttons, then press ENTER/PLAY4 to see the folder’s contents.

3. Select a file using the 5 and 6 buttons, then press ENTER/PLAY4 to start playback.

4. Press the STOP button to stop playback. To go back to the folder list, press the 3 button in stop mode.

Note: During playback you can use the 9 or : button to go back to the previous file or go on to the next one.

During playback, press 5 to flip image horizontally and press 6 to flip image vertically.

Repeat Play Modes

1. Press the REPEAT/A-B button repeatedly to select a play mode: Repeat one: repeats the current file until STOP button is pressed. Repeat all: repeats all files in the current folder until STOP is pressed.

2. To cancel the repeat playback mode, press the REPEAT/A-B button until “Off” appears on the TV screen.

To access the DVD player menus:

Press the SETUP button to display the main menu.

Select a menu icon using the 3 and 4 buttons.

Use the 5 and 6 buttons to select one of the options in the menu.

Press the 4 button to access the submenu.

Use the 5 and 6 buttons select one of the options in the submenu.

Press ENTER/PLAY4 to confirm your selection. Return to a previous menu using the 3 button.

To exit from the player menus, press the SETUP button.

 

 

 

 

Dolby￿Digital￿Setup

 

 

 

 

General￿Setup

 

 

 

 

 

 

 

 

Preference￿Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

General

 

Dolby

 

Preference

 

 

 

 

 

 

 

 

 

 

 

-￿-￿￿General￿￿Setup￿￿Page￿￿-￿-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV￿Display

 

PS

 

 

 

 

 

Angle￿Mark

 

ON

 

 

 

 

 

OSD￿Lang

 

ENG

 

 

 

 

 

HDMI￿Setup

 

 

 

 

 

 

 

 

 

HDMI Audio

 

AUTO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Go To￿General￿Setup￿Page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

General Setup Menu (shown above)

TV Display

You can choose a display option that affects how a disc’s content appears on your TV screen.

Normal/PS (4:3 Standard): reproduces a 4:3 picture with some distortion.

Normal/LB (4:3 Letterbox): gives best reproduction of pictures recorded in this format (i.e., with horizontal bands at the top and bottom of the screen).

Wide Screen (16:9 Widescreen): reproduces 16:9 format films in full, on a 16:9 screen.

Angle Mark

This only works when the disc you use contains scenes simultaneously shot from multiple angles.

Select “ON” and the angle mark will appear on the screen when player reaches a scene available in multiple angles.

Select “OFF” and the angle mark will not appear on the screen when the player reaches a scene shot from multiples.

OSD Lang

The OSD Lang feature enables you to set the preferred on-screen menu language: English, Spanish, or French.

HDMI Setup

If you are using the DVD player’s HDMI output to connect to your TV, set the HDMI Setup option to the resolution that matches your TV. See the user manual that came with your TV for information on the highest resolution your TV supports.

HDMI Audio

To change the HDMI Audio mode. Select “AUTO” to select Audio mode automatically to fit your TV system accordingly or “PCM” if your TV supports 2 channel digital audio output. Select “OFF” to stop HDMI Audio mode function.

Dolby Digital Setup Menu

 

General

Dolby

 

Preference

 

 

 

 

 

 

 

 

 

 

 

 

 

-￿-￿￿Dolby￿￿Digital￿￿Setup￿￿-￿-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dynamic

 

 

 

 

 

 

 

 

 

FULL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3/4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set￿DRC To￿Full￿Compression

Dynamic

This feature monitors the audio track and controls the different sound levels via dynamic compression. It minimizes sudden volume increases such as when a commercial starts. Select a range using the 5 and 6 buttons and press ENTER/PLAY4.

Menu System

Troubleshooting

Troubleshooting

Limited Warranty

Preferences Setup Menu

The menu gives you options to change some aspects of your DVD player to fit your personal preferences. Preference menu can only be accessed when no disc is played in the disc tray or when the STOP button is pressed twice to enter complete stop mode for this menu access. Press the STOP Button once does not allow this menu access.

You can correct most problems you have with your product by consulting the Troubleshooting list that follows.

Player won’t work or no power

Try unplugging the AC power cord, wait two minutes, and plug it back in.

Menu problems

With a DVD: the disc menus are not displayed in your language. Read the disc jacket to

 

see what languages are available on that disc. Choose one that suits you, if possible.

With a DVD: there are no subtitles. Read the disc jacket to see if subtitles are available

 

on that disc. Choose subtitles in a language that suits you if possible.

If the player’s setup menus are not displayed in the language you want, check that your

Your Responsibility

1)

You must retain the original sale receipt to provide proof of purchase.

2)

These warranties are effective only if the product is purchased and operated in the U.S.A.

 

or Canada.

3)

Warranties extend only to defects in material or workmanship, and do not extend to any

 

product or parts which have been lost or discarded, or damage to product or parts caused

General

Dolby

Preference

 

 

 

-￿-￿￿Preference￿￿Page￿￿-￿-

AudioENG

SubtitleENG

Disc￿MenuENG

Rating

Password

Go To￿Preference￿Page

Audio:

Selects the dialogue language: English, French, Spanish, German, Italian, Swedish or Portuguese.

Subtitle:

Selects the subtitle language: English, French, Spanish, German, Italian, Swedish, Portuguese or Off.

Disc Menu:

Selects the disc’s menu language: English, French, Spanish, German, Italian, Swedish or Portuguese.

The remote control does not work

Remember to point the remote control at the front of your player (towards the infrared remote sensor). Make sure there are no objects between the remote and the player.

Maybe the batteries in the remote are weak, dead, or installed incorrectly. Replace the batteries and make sure the polarity of the terminals (+ and –) is correct.

Operate the remote control at a distance of no more than 20 feet.

Disc won’t play

Insert a disc with the label side facing up.

Check the type of disc you put into the disc tray. Refer to Compatible Disc section.

Make sure the regional code of the disc is Region No. 1.

Forgot password

language is among those listed in the MENU LANG menu. If necessary, choose another

language.

To clear a menu from the screen, press 3 button or repeatedly press SETUP.

The invalid icon ( Manual background ) appears on screen

The action cannot be completed at this time for one of the following reasons: the disc’s software restricts it; the disc’s software doesn’t support that feature (e.g.,angles); the feature is not available at the moment; you’ve requested a title or chapter number that is out of range.

Ratings problems

If you forget your password, go to “Forget Password” information in this section.

The default language for dialogues and subtitles may be preset by the DVD.

by misuse, accident, improper operation or maintenance, or use in violation of instructions

provided with the product, or to product which has been altered or modified without

authorization of AVC, or to products or parts thereof which have had the serial number

removed or changed.

Out of Warranty

In the event your product requires repair after the limited warranty period has expired, please contact our Customer Support Center at 1-800-506-5746,1-877-252-6873 or

www.1800customersupport.com/RCA

Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm,

Saturday: 9am–NOON Eastern time.

Important: You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns Center.

Note: Discs are created differently. The DVD player cannot override some language preferences. If a disc’s software was created to play the movie (title) in a perferred language, the preference you set might be ignored. Also, if the language is not available on the disc you are playing the disc’s default language will be chosen. If the disc was not created with subtitles, you won’t be able to use the Subtitle feature.

Ratings (Parental Control)

You determine the types of discs played and what types require a password to override the rating limit. Ratings are ranked from Level 1 to 8. Level 1 is least offensive material and Level 8 is the most offensive. When adjusting Ratings for the first time:

1. Press SETUP on the remote control to display the main menu.

2. Select the Preferences menu and highlight Ratings. When asked to enter an old password, enter any number.

3. Enter your new password; it is saved.

4. Select Ratings and select a level.

Note: To enforce Rating Limits, the disc you’re playing must contain a rated movie (or title).

Password

Password is not defined until you set it. Should you select a password and then forget it, go to the Troubleshooting section for instructions on resetting.

Note: There is a lock feature on your DVD player if you want to prevent your child from watching DVDs (don’t forget to remove the remote control). Follow the directions for locking and unlocking in the Troubleshooting section.

Open the tray and press DISPLAY, 0,0,0,0,1. Turn off DVD player and then turn it on by pressing the ON/OFF key, or you can unplug the unit, wait a few seconds and plug it in again.

Lock/Unlock DVD player

To lock player, press SETUP, 0, 0, 0, 8, 3 (an on-screen message, “Key Lock On” is displayed).

To unlock, press SETUP, 0, 0, 0, 8, 3.

Play starts, but then stops immediately

The disc is dirty. Clean it.

Condensation has formed. Allow player to dry out.

Picture format does not match the screen format

The picture format is adjustable, refer to GENERAL SETUP menu section. Some discs dictate the format, in which case no adjustment is possible.

Picture is distorted

The disc might be damaged. Try another disc.

When using FWD or REV buttons, it is normal for some distortion while scanning.

Make sure you’ve selected the correct option for VIDEO OUT feature.

Sound problems

If a TV is used, check whether the sound is muted or turned down low.

You may need to read just the settings in the AUDIO menu.

Sound is muted during still, frame advance, or slow-motion play.

Limited Warranty (US)

AVC MULTIMEDIA (“A VC”) makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product.

One Year Parts & Labor Warranty

AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or refurbished parts and products, at AVC’s sole discretion.

During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you must first call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the hours listed in the box on the right. The determination of service will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the effective warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation charges to the service facility.

Packaging and Shipping Instruction

When you send the product to the AVC service facility you must use the original carton box and packing material or an equivalent as designated by AVC.

All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.

This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.

For more information on other products and services, please visit our web site at

www.1800customersupport.com/RCA

Important: Also keep your “Bill of Sale” as proof of purchase.

Model no

Product name

Type o f set

Serial no

Invoice no

Date purchased

Dealer name

FOR SERVICE AND REPAIR, PLEASE VISIT www.1800customersupport.com/RCA

Specifications and external appearance are subject to change without notice.

152-02790-0285-101

Page 2
Image 2
RCA DRC279BK user manual Limited Warranty