Adjust the LCD Screen

you can adjust Brightness, Ratio and Contrast of the LCD screen.
1. Press the VIDEO MODE button.
2. Press the / button to select Brightness, Ratio or Contrast.
3. Press the / button to change the setting.
4. Press the VIDEO MODE button to exit the menu.
This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in a
manner that allows specic or limited operation during playback. Therefore, this unit may not respond to
all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specic
DVD in question for more information about the options available on that DVD.
“ ” may appear on the screen during operation. A “ ” means the desired operation is not permitted
by the unit or disc.

Playing a Disc

1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.
See Customizing the function settings before proceeding to step 2.
2. Press the OPEN knob to open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label side facing up, pushing
gently until you hear a “click”.
4. Clo se t he d isc door. It take s a shor t wh ile for your unit to load the dis c. A fter loa ding, the uni t wi ll
automatically bring you to the main menu of the DVD or start playing the DVD.
5. If the unit does not automatically star t playing the DVD, press the PL AY button on the remote control
or button on the unit.

Pausing Playback (Still Mode)

Press the PAUSE button. To resume normal playback, press the PLAY button on the remote control or
button on the unit.
For a DVD, each time you press the PAUSE button on the remote control, the picture advances one frame.

Stopping Playback

Press the STOP button at t he locat ion whe re you want to interru pt playb ack. To re sume pl ayback a t the
position where the disc was stopped, press the PLAY button on the remote control or button on the unit.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button on the
remote control or button on the unit will reset the DVD to the beginning.

Fast Forward / Fast Reverse

1. Press th e SEARCH or SEARCH button when a disc is
playing. Each time you press the SEARCH or SEARCH
button, the playback speed changes in the following
sequence:
2. Press t he P LAY button on the remote co ntrol or press t he button on the unit when you reach the
desired point to resume normal playback.
Note:
• TheDVDplayermutessoundandsubtitlesdur ingreverseandforwardscanofDVDs.
• Thefastplaybackspeedmaydierdependingon thedisc.

Skip (Forward / Reverse)

• Pressthe NEXT button to advance titles, chapters/tracks.
• Pressthe PREV button to go back to current or previous titles, chapters/tracks.
• ForanAudioCD,usethenumberbuttonson theremotecontroltogodirectlytothedesiredtracknumber.

Audio Selection

On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the preferred
language and sound system.
1. While a disc is playing, press the AUDIO button to show the current
audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Note:
• Ifonlyoneaudioformatisrecorded ontheDVD,thenumberdoesnotchange.
• SomeDVDsallow youtochangeaudioselec tionsusingthediscmenu only.Ifthisisthe case,pressthe
MENU button and choose the appropriate language on the disc menu.
• Youcanselect differentaudiochannels (Left,Right,Mono orStereo)onan AudioCDbypressin gthe
AUDIO button repeatedly.

Subtitle Selection

1. While a DVD is playing, press the SUBTITLE button to display the
current language setting, as shown in the example.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. you can turn subtitles o by
pressing the SUBTITLE button repeatedly until the “ OFF ” is displayed.
Note:
• SomeDVDsaresettodisplaysubtitles automatically,andyoucannotturnthemoffevenifyousetthe
subtitle function to o.
• Duringsomescenes,thesubtitlesmaynot appearimmediatelyafteryouselectyourdesiredscene.
• Thenumberofsubtitlelanguagesrecordeddiersdepending onthedisc.Ifonlyonelanguageisrecorded,
the language does not change.
• Thisfunctioncanonlybeusedfor discsonwhichsubtitleshavebeenrecordedinmultiplelanguages.
• SomeDVDsallowyoutochangesubtitles usingthediscmenuonly.Ifthisisthecase,press theMENU
button and choose the appropriate subtitle on the disc menu.

Angle Selection

Some DVDs cont ain sc enes th at have been shot from a number
of dierent angles. For these discs, the same scene can be viewed
from each of these dierent angles.
1. While you a re play ing a DVD with d ifferent angles recorde d,
press the ANGLE button to view the number of current angles
available.
2. Press the ANGLE button repeatedly to change the scene to the
next recorded angle.
• Afterapprox.twoseconds,playback willcontinue
from the new angle selected.
• Ifnobuttonispressedwithin10seconds,playback
continues without changing the current angle.
Note:
This function can only be used for discs on which scenes
shot from multiple angles have been recorded.

Display Function

While the disc is playing, press the DISPLAY button
repeatedly to display information on operation status.
Elapsed Time:
Elapsed time from the beginning of the chapter/title
which is currently playing.
Remaining Time:
Remaining time of the chapter/title which is currently
playing.
Playing a Disc (Basic Playback)
[ 1 ENGLISH ]
[ 1 ENGLISH D5.1CH ]
E - 5
you can play a specic DVD title or chapter repeatedly (title repeat, chapter repeat, A-B repeat).

Repeating a Chapter

1. While the DVD is playing, press the REPEAT DISC button until the “ Repeat Chapter ” indicator displays on
the screen. The current chapter is played repeatedly.

Repeating a Title

2. While the DVD is playing, press the REPEAT DISC button until the “ Repeat Title ” indicator displays on the
screen. The current title is played repeatedly.
To Resume Normal Playback
3. While the DVD is playing, p ress the REPEAT DISC button until the “ Repeat all ” indicator displays on the
screen.
you can play a single CD track or the whole disc repeatedly.

Repeating a Single Track

1. While the CD is playing, press the REPEAT DISC button until the “ Repeat single ” indicator displays on the
screen. The current track is played repeatedly.

Repeating the Whole Disc

2. While the CD is play ing, press the REPEAT DISC button u ntil the “ Repeat all ” i ndicator d isplays on the
screen. The whole disc is played repeatedly.
To Resume Normal Playback
3. While the CD is playing, press the REPEAT DISC button until the “ O ” indicator displays on the screen.

Repeating a Specic Section

you can play a specic section repeatedly.
1. While the disc is playing, pre ss the REPEAT A-B button at the beginning of the section (“ Repe at A- ” is
displayed) you want to play repeatedly.
2. Press the REPEAT A-B button again at the end of the section (“ Repeat A-B ” is displayed).
3. The unit will immediately begin replaying your selection.
To Resume Normal Playback
4. While t he disc is playing, press the REPEAT A- B button until the “ Repeat A-B O ” indicator displays on
the screen (th e repeat indica tor dis appears from t he scree n for a CD). The s ystem w ill retu rn to normal
playback.
Note:
• SomediscsmaynotpermitA-Brepeat operation.
• YoucannotsettheA-Brepeatfunctionfor asegmentthatincludesmultiplecameraangles.
• Youcanspecifyasegmentonlywithinthe currenttitleortrack.
• Theremayb easlightdiffe rencebetweenpoin tAandtheloca tionwhereplayba ckactuallyresum es
depending on the disc.
Repeat Playback PlayingDivX®VideoorPictureles
ThisunitcanplayDivX®andpicture lesrecordedonCD-R/CD-RWdiscs,USBashdriveandSDcard.
To play video les on this product you must rst convert them to DivX format using the DivX Plus Player
on your PC or MAC. This application can be downloaded at www.divx.com. Please do so, and then install
on your PC or MAC.

PlayingDivX®Video/PictureFiles

If playing DivX video o r picture files from a USB d rive or SD car d, see note
below.
1. Press the OPEN knob to open the disc door.
2.PlaceaDivX®/pictureledisc ontothetraywithlabelsideup.
3. Close the disc door.
4. A selection menu will appear on the screen.
5. Press or button to select the picture or video icon, and then
press ENTER.
If picture mode is selected, use below to nevigate the menu:
/ : selects a le
/ : page up or down
RETURN : returns to previous menu
ENTER : plays your selected le
Note:
•Forplayingleson USBashdriveorSDcard, youshouldplugintheUSB ashdriveorSDcardwhen the
unit is in STANDBy mode. then follow step 5.
•Youcanpressthe button to interrupt playback, and press the PLAy button to resume playback.
•YoualsocanusetheGOTObuttonoruse thenumberedbuttonstoenteraphotonumberandquickly select
any image.
•Duringplayback,pressANGLEbuttonrepeatedly torotatethepicture.
ABOUTDIVXVIDEO:DivX®isa digitalvideoformatcreatedbyDivX,Inc.Thisis anocialDivXCertieddevice
that plays DivX vid eo. Visit ww w.divx.com for more infor mation and software tools to convert your les into
DivX video.
ABOUTDIVXVIDEO-ON-DEMAND:ThisDivX Certied®devicemustberegisteredinorderto playDivXVideo-
on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup
menu. Go to vod.divx.co m with this code to comple te the registrat ion pro cess an d learn more about DivX
VOD.
DivXCertifed®toplayDivX®video,includingpremium content.
ENTER

Language Setup

1. Press the SETUP button on the remote control or MENU button on the
unit in stop mode (when disc is not playing).
2. Press the button to select Language Menu.
3. Press the / button to select the option, then press the button.
4. Press the / button to select your preferred language, then press the
ENTER button to conrm.
5. Repeat steps 3 and 4 to adjust other options.
6. Press the SETUP or RETURN button to exit the menu.
Note:
• SomeDVDsmaynotplayintheaudiolanguageyouselected.Apriorlanguagemaybeprogrammedonthedisc.
• SomeDVDsmaybeset todisplaysubtitlesinalanguageother thantheoneyouselected.Apriorsubtitle
language may be programmed on the disc.
• SomeDVDsallowyouto changesubtitleselectionsusingthedisc menuonly.Ifthisisthecase, pressthe
MENU button and choose the appropriate subtitle language from the selection on the disc menu.
• SomeDVDsmaynotincludeyourpre-selected language.Inthiscase,
the DVD player automatically displays disc menus consistent with the
disc's initial language setting.

Video Setup

1. Press the SETUP button on the remote control or MENU button on the
unit in stop mode (when disc is not playing).
2. Press the / button to select Video Menu.
3. Press the / button to select the option, then press the button.
4. Pres s th e / button to a djus t th e se ttin g, th en p ress the ENTER
button to conrm.
5. Repeat steps 3 and 4 to adjust other options.
6. Press the SETUP or RETURN button to exit the menu.
Customizing the Function Settings
E - 6 E - 7

Dolby Digital

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can
reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-
channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel
soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Sound System
E - 8
Troubleshooting Guide
Printed in China 811-938091W040

Symptom Cause (and remedy)

No power.
The remote
control does
not function.
No sound or
only a very
low-level
sound is
heard.
No picture.
The picture is
not clear.
Severe hum or
noise is heard.
The disc does
not play.
No sound is
input from the
HDMI IN.
•EnsuretheACpower adapterisconnected.
• Theunitisnotturnedon.
•Makesurethe infraredremotesensoris notblocked.
• Makesuretheplasticsheethasbeen removedfromtheremotecontrol.
• Pointtheremotedirectlyattheinfraredremote sensorontheunit.
• Replacethebatteryintheremotecontrol withanewone.
•Thevolumecontrolis locatedonthe sideof theunit– pleasetryadjusting this.
• Thesystemisinpausemode.Pressthe button to return to normal play mode.
• Theunitisinfast-forwardorfast-reversemode.Press the PLAY button on remote control
to return to normal play mode.
• MakesuretheAUDIO/VIDEOoutputconnectionsarecorrect.
• TheDTSDVDcannotbedecodedtohave speakeroutput.
• Theunitistoohot;shuto theunitfor30minutestocoolit down.
• Theregion numbero fthedis cdoesn' tmatchth eregion
number of this unit.
• Cleanthedisc.
• Thediscisscratched.
• AdjusttheLCD'sbrightnessandcontrastusingthe VIDEO MODE button on the remote control.
• Theplugsandjacksaredirty.Wipethem withaclothslightlymoistenedwithalcohol.
• Cleanthedisc.
• Thereisnodiscinside(“NoDisc”appears onthescreen).
• Insertthedisccorrectlywiththe playbacksidefacingdown.
• Cleanthedisc.
• Anon-NTSCdischasbeeninserted.Theunit anddiscregionnumberareincompatible.
• Condensationmay haveformedinsi detheunitd uetoasudde nchangein temperature.
Wait about an hour for it to clear and try again.
• ChecktheconnectionbetweenthisunitandtheHDMIINjackofotherequipment.
• SeeifyourTVsupportsthis480p/576p/720p/1080iDVDsystem.
• MakesureyourTVsupports���HDCP(HighBandwidthDigitalContentProtection).
Need More Help?

Please visit online help at http://www.RCAav.com

Specications and external appearance are subject to change without notice.

System Setup

1. Press the SETUP button on the remote control or MENU button on the
unit in stop mode (when disc is not playing).
2. Press the / button to select TV System Menu.
3. Press the / button to select the option, then press the button.
4. Press the / butto n to adju st th e set tings, then pres s th e ENTER
button to conrm.
5. Repeat steps 3 and 4 to adjust other options.
6. Press the SETUP or RETURN button to exit the menu.
Default
It takes 3-5 seconds to reset the DVD settings to the factory default.

View DivX(R) VOD

DivX® Registration
DivX®registrationcodeallowsyoutorentandpurchase moviesusingtheDivX®VODservicefromtheinternet.
This menu setting will display the registration code of your unit as follows:
YOU MUST REGISTER YOUR DEVICE TO PLAY
DIVX PROTECTED VIDEOS.
REGISTRATION CODE:
REGISTER AT HTTP://VOD.DIVX.COM
Registration service at http://vod.divx.com
Follow the instructions and download the movie from your computer onto a CD-R/RW or DVD+R/-R or
DVD+RW/-RW for playback on the unit.
Note:
• Thisregistrationcodeisfor DivX®Video-On-Demandonly.Donotapplythiscodefor otherapplicationsor
websites.
• Ifyouhavealreadyregisteredthisproduct,selectingtheViewDivX(R)VODsettingwillallowyoutoderegister
(deactivate) the product for DivX playback - we recommend you DO NOT deregister the product.
Screen Saver
To turn on or o the screen saver (screen protection to prevent image burn).
Note:
When you leav e th e un it in D VD s top mode for app roxia mtel y 5 minu tes, the scr een save r of the uni t
automatically appears if you set the Screen Saver to On mode. To turn o the screen saver, press the PLAy
button.
TV Display
Depending on the fo rmat of the DVD d isc, yo u can choose the picture format (aspec t
ratio) best suited the format of your TV screen.
4 : 3PS
• Whenwide- screenvideois played,thismod eclipstherigh tandleftside softhe
image so that it can be viewed on a conventional screen.
• Somewide-screenDVDsthatdonotpermit PanScanmodeplaybackareautomatically
played in letterbox mode (black bands that appear at the top and bottom of the
screen).
4 : 3LB
• Whenwide-screenvideoisplayedin thismodeonaconventionalscreen,blackbands
appear at the top and bottom of the screen.
16 : 9
• Thisisthecorrectmodeforplaying wide-screenvideosontheunitscreenorother
external wide-screens.
Note:
• Thedisplayablepi cturesizeispreseton theDVD.Thereforetheplayba ckpictureof
some DVDs may not conform to the picture size selected.
• WhenyouplayDVDsrecordedin the4:3aspectratio,theplaybackpicturewill always
appear in the 4:3 aspect ratio regardless of the TV display setting.
• Select16:9toconformtheLCDscreenon theunit.AlwaysbesurethatyourTVdisplay
conforms to the actual TV in use if you connect the unit to a T V.
HDMI Res. (Resolution)
you can set the HDMI Res. (Resolution) to be Auto, 480p, 720p, 1080i or 1080p, according to the connected TV.
Note:
• SelecttheHDMIresolutionaccordingtotheperformanceoftheconnectedTV.
• IftheVideooutisnotsettoHDMI,youcannotselecttheHDMIRes.
JPEG Interval
To set the JPEG Interval for slide show playback. Select O to disable the slide show feature.
O: Plays back one le at a time.
5 seconds Plays back images in the form of a slide show at 5 seconds interval.
10 seconds Plays back images in the form of a slide show at 10 seconds interval.
15 seconds Plays back images in the form of a slide show at 15 seconds interval.
Locating a Desired Section

Locating a Specic Chapter / Title

If you know the chapter/title number for the chapter/title that you want to play, you can locate it by direct ly
selecting that number.
1. Press the GOTO button.
2. Press the / button to highlight chapter/title number, then press the corresponding number buttons for
the chapter/title you want (for example: 02, 08, 10 or 15). Press the ENTER button to conrm.
3. Playback starts from the selected chapter/title.
Note:
• Ifthechapter/titlenumberenteredisnot permitted.Repeatsteps1and2tore-enterthecorrectnumber.
• Somediscsmaynotrespondtothis process.
• Thismethodoflocatingachapter/titleis availableonlyonaDVDthatcontainschapter/titlenumbers.

Locating a Specic Time

you can move to a specic location by entering its corresponding time (hours, minutes, seconds).
1. Press the GOTO button.
2. Press the corresponding number buttons (5 digits: X:XX:XX,
for example:
0 30 05, 1 08 23, 1 22 56) for the setting point you want.
3. Playback starts from the selected section.
Note:
• Ifthetimeenteredisnotpermitted bytheDVD," " will display. you should re-enter the correct time.
• Somediscsmaynotrespondtothis process.
• Somescenesmaynotbelocatedas preciselyasyouspecied.
• Thismethodforaccessingspeciclocationsisavailable onlywithinthecurrenttitleoftheDVD.
you can combine your favorite titles/chapters/tracks and play
them in the order you determine.
1. Press the MEMORY button and a program screen appears.
2. Sele ct t he i tems in t he o rder you want by p ressi ng th e
number buttons. Each time you press the Cursor buttons ( ,
, , ), the space is highlighted. Highlight where you want
to enter, then press the corresponding number buttons.
3. Pr es s t he C ur so r b ut to ns ( , , , ) t o mov e the
highlighted bar to , then press t he P LAY or ENTER
button. The DVD player starts memory playback.
4. To resume normal playback from memory playback
a) Press the MEMORy button.
b) Press th e Cu rso r b utt ons ( , , , ) to m ove t he
highlighted bar to “Clear”, then press the ENTER button.
All the input programs will be cleared.
c) Press the PLAY button to resume normal playback.
Note:
• Ifth e t i tl e o r c h ap te r n u mb e rs  yo u e nt e re d i s n ot
permitted by the D VD, after you press the ENTER button,
it will restore to [- -]. you should re-enter correct numbers.
• Somediscsmaynotpermitmemory playbackoperation.
• Ifyous electrepeat duringmemory playback,the DVD
player repeats the current memory playback.
• Ifyo u pr e ss t h e MEMORY button while the display
appears on the TV screen, the display disappears.
• Theprogrammedselectionswillbeclearedwhenyou
open the disc tray or turn o the DVD player.
Programmable Memory

e.g. DVD

e.g. CD

x2 x4 x8 x20
x2 x4 x8 x20
Language
Player Menu
Subtitle
Audio
Disc Menu Lang
Video
TV Display
HDMI Res.
JPEG Interval
Default
View DivX(R) VOD
Screen Saver
TV System
16 : 9
4 : 3PS
Cut o when a wide-
screen video image
is played.
4 : 3LB
DRC99380U_ENGLISH IB_May 4.indd 2 2010-5-4 17:12:40