Display Settings
EN
Showing the Demonstration
Not operational in CD mode. Press DEMO/DIMMER to turn on/off demonstration mode. The demon- stration scrolls through all display operations.
8.Press TIMER to set volume.
9.Turn the VOLUME knob to set desired volume level.
10. Press PROG./SET to save settings or STOP | to |
quit setting. |
|
Display Clock / Timer
Setting the Clock
1.Press and hold CLOCK until the hour flashes on the display.
2. Press SKIP FORWARD | / SKIP |
BACKWARD | to set the hour and then |
press CLOCK to shift to minute digits. | |
3. Press SKIP FORWARD | / SKIP |
BACKWARD | to set the minute. |
4.Press PROG./SET to save settings and STOP to quit setting.
Note:
•When system is ON, you can press CLOCK to display the current time for about 2 seconds.
•Clock cannot be set in FM Mode.
Setting the Timer
1.Press and hold TIMER until the ON and the hour flash on the display ( ON - timer on time ).
2. For setting time, press SKIP FORWARD | / | |
SKIP BACKWARD | to set the hour and |
|
then press TIMER to shift to minute digits. |
| |
3. Press SKIP FORWARD | / SKIP |
|
BACKWARD | to set the minute. |
|
4.Press TIMER to change to OF (timer off time) with hour flashing. Repeat steps 2 & 3 for timer off time setting.
5.Press TIMER for source selection.
6. Press SKIP FORWARD | / SKIP BACK- | |
WARD | to select between CD / TUNER / | |
TAPE / TUNER REC. |
|
|
7. If Tuner or Tuner Rec is selected, press SKIP FOR-
WARD | or SKIP BACKWARD |
to select the preset station to turn on to.
Activating the Timer
Press and release TIMER to turn on/off the alarm. The alarm is active when the clock icon indicator is lit.
Adjusting the Display Brightness
1.Press and hold DEMO/DIMMER for
more than 2 seconds.
2. While the dimmer is dis-
played, press and release DEMO /DIMMER to select the desired level (DIMM 0 - 3).
Sleep Mode
You can select the time interval in minutes before the unit turn off automatically. Press SLEEP on the remote to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes. (Remote only)
5