RCA PRO LX5 II manual Two-Way Die-CastSpeaker with DiPole Tweeter, Unpacking

40-5007.fm Page 1 Monday, September 20, 1999 12:00 PM

Two-Way Die-Cast Speaker with DiPole Tweeter

Your PRO LX5 II Two-Way Die-Cast Speaker with DiPole Tweeter is small in size, but not in sound! Its 5-inch polypropylene woofer accurately tracks signals to provide outstanding bass, while the wide-angle dipole tweeter produces crisp, detailed highs with 360° dispersion.

Your speaker’s acoustic design matches the woofer and tweeter with the enclosure and damping materials to provide amazingly smooth and broad frequency response.

Your can handle up to 130 watts of power. The speaker is magnetically shielded, so you can safely place it next to your television or monitor.

3.Carefully place the top grille on the speaker, making sure not to touch the tweeter’s plastic film with the cover.

Corrugated

Board

Top

Grille

Plastic Foam

Packing

Box (Top)

UNPACKING

Your PRO LX5 II is shipped in protective packing materials. Before you use the speaker, follow these steps to unpack it.

Caution: To avoid damaging the speaker’s tweeter, do not touch the tweeter’s film while you are unpacking the speaker.

Front

1. Remove the corrugated board and the Grille plastic foam packing box.

2.Remove the plastic cover from the tweeter.

© 1999 Tandy Corporation.

All Rights Reserved.

Plastic

Cover

Tweeter

Tweeter Film