RCA RLC2626 manual Window, Adjusting Phase

Basic operation (to be continued)

2.Window

This TV supports no higher than 60Hz under PC mode, so please set the refresh rate of PC to 60Hz. If the frequency is higher than 60Hz, the screen may flicker. When the TV is in PC mode, press MENU button on the remote control. Press t/u Arrow button to select “WINDOW”.

PICTURE	AUDIO	SETTING	FUNCTION WINDOW			PICTURE	AUDIO	SETTING	FUNCTION WINDOW
H-POSITION			100			H-POSITION			100
V-POSITION			100			V-POSITION			100
CLOCK			100
PHASE			0
AUTO ADJUST
ADJUST		SELECT			EXIT	ADJUST		SELECT			EXIT
				MENU						MENU

1)Adjusting picture H-Position

Press q/p Arrow button to select “H-POSITION” and press t/u Arrow button to set horizontal position of picture.

2)Adjusting picture V-Position

Press q/p Arrow button to select “V-POSITION” and press t/u Arrow button to set vertical position of picture.

3)Adjusting Clock

When PC is connected to TV set because of the difference of PC parameter,you should adjust the “CLOCK” item in “WINDOW” menu until you get a good picture.

4)Adjusting Phase

When PC is connected to TV set because of the difference of PC parameter,you should adjust the “PHASE” item in “WINDOW” menu until you get a good picture.

5)Auto Adjust

If there are unexpected problems happened when you adjust the items, you can select the “AUTO ADJUST” and press u Arrow button, the TV set will resume the original settings.

Note: Only “H-Position” and “V-Position” are available for YPBPR mode.

22