NOTE:
·After setting SPEED DEFROST, oven can be programmed to automatically switch to one or
·For speed defrost and one stage cooking, follow steps above. Before touching START/STOP pad, touch COOK pad, and enter time and power level. Then touch START/STOP pad.
·For speed defrost and
COOK BY WEIGHT
1.Touch COOK BY WEIGHT pad.
2.Enter the one digit code by touching the correct number pad (1~3).
3.Enter weight by touching number pads.
4.Touch START/STOP pad.
Cook By Weight Code Description
CODE | TYPE | MAX WEIGHT |
|
|
|
1 | Beef | 5 lb. 16 oz. |
|
|
|
2 | Mutton | 5 lb. 16 oz. |
|
|
|
3 | Pork | 5 lb. 4 oz. |
|
|
|
Note:
·Weight must be in pounds and ounces.
·Ounce weights less than 10 must be preceded by a 0. If label gives weight in pounds only, change the fraction of a pound to ounces using the following chart.
Converting Fractions of a Pound to Ounces
Fractions of a pound | Ounces |
|
|
Less than .03 | 0 |
|
|
.03 to .09 | 1 |
|
|
.10 to .15 | 2 |
|
|
.16 to .21 | 3 |
|
|
.22 to .27 | 4 |
|
|
.28 to .34 | 5 |
|
|
.35 to .40 | 6 |
|
|
.41 to .46 | 7 | |
|
| |
.47 to .53 | 8 | |
|
| |
.54 to 59 | 9 | |
|
| |
.60 to .65 | 10 | |
|
| |
.66 to .71 | 11 | |
|
| |
.72 to .78 | 12 | |
|
| |
.79 to .84 | 13 | |
|
| |
.85 to .90 | 14 | |
|
| |
.91 to .97 | 15 | |
|
| |
above .97 | go to next | |
even | ||
| ||
|
|
·During cooking, the system will pause automatically and sound to remind user to turn food over. After that, touch START/STOP pad to resume cooking.
DEFROST BY WEIGHT
1.Touch DEFROST BY WEIGHT pad.
2.Enter weight by touching number pads.
3.Touch START/STOP pad.
NOTE:
·Weight must be in pounds and ounces. Ounce weights less than 10 must be preceded by a 0. If label gives weight in pounds only, change the fraction of a pound to ounces by using the chart given above. The maximum weight is 5lb.16oz.
·During defrosting the system will sound to remind user to turn food over, then touch START/STOP pad to resume defrosting.
SETTING CHILD LOCK
The safety lock prevents unsupervised operation by children.
1.To set, in standby mode, press and hold RESET pad for 3 seconds. Lock indicator will appear on the display.
2.To cancel, in standby mode, press and hold RESET pad for 3 seconds. Lock indicator will disappear.
