1.Push on Battery Door in the direction of the arrow, slide door down and pivot upward.
2.Insert 2 “AA” size alkaline batteries (not Included). Be sure the “+“, or
cap end, of each battery IS mstalled as shown on the battery diagram.
3.Close the Battery Door.
IMPORTANT SAFETY INFORMATION: Always remove batteries if the unit is
not going to be used for a month or more. Batteries left in the unit may leak and cause damage. Always adhere to the following precautions:
A.Any battery may leak if mixed with a different battery type, inserted incorrectly, or if all batteries are not replaced at the aame time.
B.Any banery may leak or explode if disposed of in fire or if an attempt is made to charge a battery not intended to be recharged.
C.Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury.
When discarding batteries, be sure to dispose of them in the proper manner, according to your state and local regulations.
Always return tape operation buttons lo their off position before storing. This will relieve pressure on certain parts in the tape player that might deform after long periods of time.
3
