Alarm Settings
EN |
Nap Mode
For catnaps up to 2 hours without disturbing the regular alarm settings, the NAP function wakes you up after a short period of time. Simply:
1.Press NAP, the NAP indicator will flash. While the NAP indicator is flashing, press REV or FWD to adjust nap time. The time range is from 10 minutes to 2 hours at 10 minutes interval (default is 20 minutes).
2.Wait 3 seconds or press NAP again to confirm, the NAP indicator will show on the display.
3.Press NAP once to show time left, after 3 seconds, the display will return to clock time.
Stopping the Nap Alarm
When the NAP alarm sounds, you can press OFF to stop it.
Cancelling the Nap Alarm
Press and hold NAP for 5 seconds to cancel the nap setting.
Tip:
Only alarm tone can be se- lected in NAP mode.
Snooze
This operation allows extra sleep time after the alarm is on. The alarm will be off by pressing SNOOZE until the snooze period is over. Snooze function can be used repeatedly up to 2 hours. After this, the alarm will turn off until the next alarm conditions are met. Set the “quiet” period as follow:
1.While pressing SNOOZE, press REV or FWD to set the “quiet” period (the default time is 9 minutes) from 1 minute to 30 minutes. Release SNOOZE, then the “quiet” period is set.
Auto Brightness
Slide the AUTO BRIGHTNESS switch
ON 
OFF at the back of the unit to the
AUTO BRIGHTNESS
ON position. The brightness of the LCD display will vary automatically according to the environment.
Slide to the OFF position, the display will remain at its brightest level.
Backlight Color Select
You can choose among 4 different backlight color - green, blue, amber and white.
1.Before a specific color is set, the back- light color will keep changing.
2.Press Color Select Color Select at the back
of the unit to toggle among different backlight color.
3.If the AC power and backup batteries are removed, the 4 backlight colors will starting changing again once the AC power is resumed.
17 
