RCA RP4801 manual Setting the Wake Time, Waking by Selected Source

Operating the Alarm

EN

Setting the WAKE Time

Your digital clock operates on a 12 hour standard mechanism.

1.Press the SET button until WAKE 1 / WAKE 2 icon is blinking.

2.Press REV or FWD to set the wake time. The time decrements or increments will follow by a faster rate when you press and hold either REV or FWD .

3.After the WAKE time is set, press SET repeatedly until no icon is blinking.

Tip:

The unit equips with GRAD-

U-WAKEfeature, the alarm tone volume will increase gradually to its maximum in

about 30 to 45 seconds.

Tip:

If you set the SLEEP

function with low volume level before going to bed, we advise using WAKE mode to wake you

up since its volume will automatically increase.

Waking by Selected Source

You may be woken up by WAKE , RADIO or CD .

1.Select an AM or FM station.

2.Set wake time (see above directions).

3.Press WAKE 2 or WAKE 1 to select wak-

ing up by WAKE , RADIO or CD . Corresponding indicator will be up next to the selected setting.

4. Adjust the volume by turning VOLUME.

You can select your CD wake track by the following procedures.

1.Press WAKE UP CD TRACK.

2.While pressing, press REV or FWD to select your desired CD wake up track.

Note:

When you turn off the alarm by pressing OFF, the alarm will turn on at the same time tomorrow.

6