This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
Ventilation
You must adequately ventilate the product. Make sure there is adequate space around the unit to provide proper air flow for ventilation. See diagram.
7 cm
10 cm
10 cm
7 cm
10 cm ![](/images/new-backgrounds/1048543/485431xi3.webp)
This product complies with DHHS Rules 21 CFR Subchapter J. Applicable at the date of manufacture.
RISK OF ELECTRIC SHOCK |
DO NOT OPEN |
WARNING:SHOCK HAZARD |
- DO NOT OPEN |
AVIS:RISQUE DE CHOC |
ÉLECTRIQUE-NE PAS OUVRIR |
SEE MARKING ON BACK OF PRODUCT
THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF “DANGEROUS VOLTAGE” INSIDE THE PRODUCT.
THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
Important battery information
•Do not mix different types of batteries or new and old batteries. Do not use rechargeable batteries.
•In order to avoid any risk of explosion, observe the polarities indicated inside the battery compartment. Replace only with the type of batteries specified. Do not dispose of them in a fire or recharge them.
•If you are not using the remote control for a long period of time, remove the batteries.
Please respect the environment and prevailing regulations. Before you dispose of batteries or accumula- tors, ask your dealer whether they are subject to special recycling and if they will accept them for disposal.
Illustrations contained in this document are for representation only.
Caution:
This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. Do not open covers and do not repair yourself. Refer servicing to qualified persionnel.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
interference by one or more of the following measures:
•• Reorient or relocate the receiving antenna.
•• I ncrease the separation bet ween the equipment and receiver.
•• Connect the equipment into an outlet on a circuit different from that to which the receiver
other) and only fits into AC power outlets one way. If the
plug won’t go into the outlet completely, turn the plug over and try to insert it the other way.
If it still won’t fit, contact a qualified electrician to
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
WARNING: MAINS PLUG IS USED AS DISCONNECT DEVICE AND IT SHOULD REMAIN READILY OPERABLE DURING INTENDED USE. IN ORDER TO DISCONNECT THE APPARATUS FROM MAINS COMPLETELY, THE MAINS PLUG SHOULD BE DISCONNECTED FROM THE MAINS SOCKET OUTLET COMPLETELY.
Please read and save for future reference.
Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.
•• Read these instructions.
•• Keep these instructions.
•• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•• Only use attachments / accessories specified by the manufacturer.
•• Use only with a cart, stand, tripod,
It's important to read this instruction prior to using your new product for the first time.
is connected.
•• Consult the dealer or an experienced radio / TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This Home Theater has earned the ENERGY STAR.
change the outlet, or use a different one. Do not attempt to bypass this safety feature.
Removing the power plug is the only way to completely remove power from your product. Make sure the power plug remains easily accessible.
Note
This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, this player cannot play the disc. The Region number for this DVD player is Region 1.
Service information
This product should be serviced only by those specially trained in appropriate servicing techniques.
Main plug is used as the disconnect device, it shall remain operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the main plug of the apparatus shall be disconnected from the mains socket outlet completely.
Caution
Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam. Class 1 laser product.
This system must be opened only by qualified technicians to prevent accidents caused by the
laser beam.
DVD copy protection
In accordance with the DVD standard, your DVD player is equipped with a Copy Protection system, which can be switched on and off by the DVD disc itself, in order to make any recording of the relevant DVD disc onto a videotape of very poor picture quality, or even impossible. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home use only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited.
•• Heed all warnings.
•• Follow all instructions.
•• Do not use this apparatus near water.
•• Clean only with a dry cloth.
•• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.
•• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your wall outlet, consult an electrician for replacement of the obsolete outlet.
bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
•• Unplug this apparatus during lightning storms or when unused for long periods of time.
•• Refer all ser vicing to qualified ser vice personnel. Servicing is required when the apparatus has been damaged in any way, such as the power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
| Better surround placement | No adjacent walls |
| Location | Surround speakers can go on stands facing each |
| other to approximate sidewall mounting (A), or to |
| If possible, place surround speakers to either side |
| the sides or rear of the viewing area, aimed upwards; |
| of the listening area, not behind it. |
| they can go right on the floor, or preferably, a few |
| Height |
| feet off the floor such as on end tables (B). |
| If space permits, install surround speakers 2-3 feet |
| |
| above viewers. This helps to minimize localization | |
| effects. | |
| Aiming | |
| Aim surround speakers straight across the room, | |
| not down at viewers, to help create a more open, | |
| spacious surround sound field. | |
ON•OFF: | Turns on/off the unit. |
DVD: | Selects the DVD mode. |
DIGITAL: | Selects the Optical Digital input (for listening |
| to audio input from connected TV, VCR or |
| SetTop BOX). |
AUDIO IN: | Selects the Front Audio Input. |
AUX IN: | Selects the Auxiliary input (for listening to |
| audio input from connected TV, VCR or Set- |
| Top BOX). |
0-9: | Number entry. |
CLEAR: | Quits the current setting manually from the |
| TV screen without saving change. |
INFO: Accesses the display information.
Compatible discs
•DVD, DVD-R, DVD-RW, DVD+R, DVD+RW
•CD, CD-R, CD-RW
Compatible formats
•DVD, JPEG
•CD
Regional coding
Your unit has been designed to process regional management information stored on DVD discs. The regional code for your unit is 1. Discs that have a different regional code will not play.
Variable slow motion
1.Press SLOW button on the remote in play mode.
2.Each time the SLOW button is pressed the speed of slow-motion playback changes in the following sequence:
3. Press PLAY to resume normal playback.
Changing chapter/track
While the disc is playing, press the CH+/- button to go immediately to the next or previous chapter, or to the next or previous track.
Zoom into an image
Notes
•When you press STOP, the unit stores the point where playback was interrupted. If you press PLAY again, playback resumes from this point.
•To stop playback completely or to start again from the beginning, press STOP twice. If the unit is left in STOP mode for more than 5 minutes without any user interaction, a screen saver is activated. At the end of 30 minutes without any user interaction, the unit switches off automatically.
Alternative Surround Placement
Rear wall
If rear wall mounting is the only choice, aim the speakers at each other (A), towards the front (B) or towards the sidewalls (C, D).
Experiment with placement until sounds seem to surround you, rather than come from behind you.
Test tone/Channel balance
Channel balance
Your receiver is equipped with a test signal generator to help you balance the audio level for each channel. See Audio Setup under The Setup Menu section of Instruction Book for details on how to access this feature .
As the signal “travels” from channel to channel, use the VOL controls to adjust each channel to the same loudness level.
Level adjustment and surround channel level expectation
Even though you may adjust the surround channels to be as loud as the others on the test signal, you might find that surround channels seem quieter for actual TV and Movie content. This is because producers use surround for subtle atmospherics and ambience, and only rarely for special effects.
TITLE: Accesses the title menu of DVD discs.
DISC MENU: Accesses the disc menu during playback.
OK: Confirms your selection.
/
/
/
: To navigate through the menus.
MUTE: Mutes and restores the sound.
SETUP: Enters Setup menu.
RETURN: Returns to the normal operation after using the setup menu.
VOL +/- : Adjusts the sound volume.
CH+/
, CH–/
: Directly accesses the next or previous chapter (DVD) or track (CD).
REV: Starts reverse accelerated play.
PLAY: Starts playing a disc.
FWD: Starts forward accelerated play.
SLOW: Selects SLOW motion function.
STOP: Stops playback.
(e.g., to move right, press ). The arrow buttons are used to highlight an option. Once highlighted, press OK to select the option that is highlighted.
Note
Insert 2 “AAA” batteries in the remote control prior to use.
Operating the DVD receiver
1.Turn on your television set.
2.Press ON•OFF on the remote control or ON/ STANDBY located on the front panel of the unit. Press DVD on the remote control.
Loading disc
1.Press
on the front panel of the unit to open the disc tray.
2.Place a disc onto the disc tray with the label side up.
3.Press
again to close the disc tray.
Playback
Switch the unit and the TV set on.
1. After loading a disc, playback starts |
automatically, or the disc menu appears. If the |
disc menu appears, select the Play option to |
begin playback. |
1.While a disc is playing, press ZOOM repeatedly to enlarge the image in 3 levels (
1,
2 and
3).
2.Move from one area to another (pan) using the arrow buttons.
3.To turn ZOOM off, press the ZOOM repeatedly
until the ![](/images/new-backgrounds/1048543/485431xi42.webp)
is displayed.
Random playback
While the audio CD is playing, press the RANDOM button on the remote control to activate/inactivate the random playback.
Random: All tracks will be played randomly.
Random Off: To resume normal playback.
Types of menus
• Disc menu — The appearance and contents of |
this menu varies according to the type of disc |
you have inserted. It is separate from the Setup |
Display Info (information)
1.Press INFO on the remote while a disc is playing to display information on operation status. The first banner shows the elapsed time from the beginning of the title which is currently playing.
2.Press INFO again for Title and Chapter.
Shows the number of the title/chapter currently playing and total titles/chapter on disc.
3.Press INFO a third time for Audio.
Shows the type of the audio currently selected is displayed.
4.Press INFO a forth time for Subtitle.
Shows the subtitle number and language currently selected is displayed.
5.Press INFO a fifth time for Angle. Shows the current angle is displayed.
Overview of Controls - Front Panel Controls
| | SOURCE button - Selects the input sources. | |
| | Press repeatedly to select: | |
| | • DVD – to watch DVD videos. | |
OPEN/CLOSE button - | PLAY/PAUSE button - | • optical digital IN (rear) / Aux IN (rear) / | AUDIO IN jack - |
Opens and closes the | Starts/pauses playing | Audio IN (front) - to listen to the audio input | connects audio |
disc tray. | a disc. | from the connected TV, VCR or Set Top Box. | devices. |
DVD indicator | ON/STANDBY button- | ON/STANDBY indicator VOLUME control - |
AUX IN indicator | Switches the unit on | Adjusts the volume. |
AUDIO IN indicator | and off. | |
DIGITAL indicator | | |
SLOW
A - B DISC
RCR 192 AA10
PAUSE: Freezes frame, accesses frame advance.
AUDIO: Accesses the audio function.
ANGLE: Accesses the camera angle function for DVD disc.
ZOOM: Accesses the Zoom function.
SUBTITLE: Selects the subtitle languages or turns subtitle off ( if available).
MEMORY: Creates programs.
RANDOM: Turns on/offf random playback on CDDA discs.
SUBWOOFER: Selects among subwoofer output levels (soft/balance/strong/powerful).
REPEAT A-B: Performs point-to-point repeat playback on a DVD or CD.
REPEAT DISC: Repeats chapter or title of a DVD. Repeats single track or whole CD.
LEVEL: Toggles speaker channels for different level settings. Adjust the value using VOL +/-.
2. Press STOP to stop playback. |
Accelerated play
While the disc is playing, press REV or FWD one or more times to vary the speed and direction of the accelerated play. Press PLAY to resume normal playback.
Pause
While the disc is playing, press PAUSE once for freeze frame. Press PLAY to resume normal play- back.
Frame advance
1.Press PAUSE twice. “Step” is displayed.
2.Each time you press PAUSE button, the picture advances one frame.
3.Press PLAY to resume normal playback.
menu. |
• Setup menu — Press SETUP to access this menu. |
Player Menu | : English |
| : English |
| : English |
Disc Menu | : English |
Default
DVD Info Display
Time00:18:18
Title 1/21 | Chapter 7/29 |
Audio | 1/3 | 6 ch Eng |
Subtitle | | 1/6 Eng |
Angle | 1/1 | |