Radio Setting the Clock Display Function, CD Playback

Radio

Setting the Clock

Display Function

The unit must be in standby mode. To enter standby mode, make sure that the unit is plugged in, but not turned on.

1.Press and hold the / MEM button until the HOUR digit blinks.

2.Press the / - TUNE or / TUNE + button to set the current hour, then press the / MEM button to confirm.

3.Press the / - TUNE or / TUNE + button to set the current minutes.

4.Press the / MEM button to start the clock. The clock will automatically start if no button is pressed within 5 seconds.

Note:12-hour system "12:00 PM" = NOON.

TUNING IN TO A STATION MANUALLY

1.Press the button on the front panel to turn on the unit.

2.Press the CD·RADIO button on the unit until TUNER is displayed.

3.Press the AM /FM button on the unit to select AM or FM.

4.Press the / TUNE + or / - TUNE button to tune in to a desired station.

Note: When using the radio, the station will disappear and the time will be displayed if no button is pressed within 5 seconds.

To Quickly Search for a Station

Press and hold the / TUNE + or / - TUNE button until the tuner starts searching for a station, then release.

The tuner will stop on the next station.

To Turn Off the Radio

Press the button on the unit to turn the unit off.

Setting a Radio Station PRESET

The unit can store a total of 20 stations in memory (10 FM, 10 AM). Presetting allows you to tune in to a station directly.

1.Press the CD·RADIO button on the unit to select TUNER.

2.Press the AM /FM button on the unit to select AM or FM.

3.Press the / TUNE + or / - TUNE buttons to tune in to a desired station.

4.Press the / MEM button until the “MEMORY” indicator blinks and the two digits (e.g. "01") blink on the display. The digits (e.g. "01") indicate the preset station number that will be used to store your station.

5.If you want to store to a different preset number, simply

press the / PRESET button to repeatedly until the desired preset station number is displayed.

6.Press the / MEM button to store the station.

7.Repeat steps 3 to 6 for the next preset.

TUNING IN TO A PRESET RADIO STATION

1.Press the CD·RADIO button on the unit until TUNER is displayed.

2.Press the AM /FM button on the unit to select AM or FM.

3.Press the / PRESET button to select a preset station.

CD Mode

1.During playback, press the DISPLAY button repeatedly to shuffle between the CD playback mode and the current time.

2.When stopped, press the DISPLAY button to shuffle between the total number of CD tracks and the current time.

RADIO Mode

•Press the DISPLAY button to shuffle between the current radio station and the current time.

CD Playback

CD PLAYBACK

1.Press the button on the front panel to turn on the unit.

2.Press the CD·RADIO button to change CD mode.

3.Press the button to open the CD drawer. Place a CD onto the CD tray with the label side up and then press the button to close it. The CD will be scanned by the unit and the total number of tracks will be displayed.

4.Press the button to start playing the CD. The current track appears on the display.

To Stop Playback

• Press the button.

To SKIP to a Different Track

•To SKIP to the beginning of the current track, or any earlier track, press the / - TUNE button.

•To SKIP to the beginning of the NEXT track, or any later track, press the / TUNE + button.

To FAST FORWARD or FAST REVERSE to a Particular Point

•To scan forward at high speed, press and hold the / TUNE + button and release it at the desired point.

•To scan backward at high speed, press and hold the / - TUNE button and release it at the desired point.

•Fast forward or Fast reverse will continue searching the CD until it reaches the end.

Repeat the Entire CD
• Press the	/PRESET button until	CD
“REPEAT” stops blinking and remains		REPEAT
“REPEAT” stops blinking and remains
on.
All tracks will be played repeatedly.

Cancel Repeat Play

•Press the /PRESET button until “REPEAT” disappears.

CD PROGRAMMABLE PLAYBACK

20 tracks can be programmed to play in a preset order.

1. When the unit is ON and in CD MODE,	CD MEMORY
1. When the unit is ON and in CD MODE,
make sure the CD is STOPPED. Press
the / MEM button. “MEMORY” and “1
” will blink on the display.

4.To add additional tracks, repeat steps 2 - 3 (up to 20 tracks).

5.To start playback, press the button.

To check the program:

•After setting, press the button to start playing, then press

the / TUNE + or / - TUNE buttons to check the programmed tracks.

To add additional tracks during program playback:

•Press the button, then press the / MEM button repeatedly until the number of the last programmed track appears and repeat steps 2 - 4 above.

To change the programmed tracks during program playback:


• Press the		button, and press the		/ MEM button
repeatedly to select the number of the program, then press
the	/ TUNE + or		/ - TUNE buttons to alter the track.

CD REPEAT PLAYBACK

Note: During playback, the track number will disappear and the

Repeating the Current Track

•

Press the

/ PRESET button until “REPEAT” blinks, the

time will be displayed if no button is pressed within 5 seconds.

current track will be played repeatedly.

• Adjust volume by pressing the VOLUME +/- buttons.

• Select a desired different track to be repeated by pressing

the

/ TUNE + or

/ - TUNE buttons.

To Pause Playback

REPEAT

•

Press the

button. The current track

number blinks.

•

To resume playback, press the

button again.

2. Press the	/ TUNE + or		/ - TUNE	CD MEMORY

buttons to select the desired track. For example, to play track 2 first, the display would look like this:

3. Press the / MEM button to store the track in memory.

Press the / MEM button to register the newly programmed

track into memory.

To erase the whole program, do one of the following:

•Press the button twice.

•Press the CD·RADIO button to change to radio mode.

•Open the CD drawer by pressing the button.

Note: You can use the REPEAT function during program play.

Setting the Cooking Timer

Troubleshooting, Care & Maintenance

1. Press the TIMER button. The “TIMER” indicator blinks.

TIMER

2.Press the / TUNE + or / - TUNE buttons to select your desired time from 1-99 minutes.

•TIP: Press the TIMER button repeatedly to select following

preset times: 10, 15, 30, 45, 60, 75, 90 minutes. You can then "fine-tune" your time by using the / TUNE + or / - TUNE buttons.

•TIP: Press and hold the / TUNE + or / - TUNE buttons to fast forward/reverse to desired time.

3.When the preset time elapses, the ALARM will sound.

4.To turn Off the ALARM, press the TIMER button once. Otherwise, the ALARM will automatically turn off after 60 minutes if no button is pressed.

Note: Do not press any buttons within 5 seconds after setting the cooking time, otherwise, the cooking timer will be cancelled.

CANCELLING THE COOKING TIMER

•Press the TIMER button until the time of the cooking timer shows "00". The “TIMER” indicator will disappear within 5 seconds.

Limited Warranty

CLOCK DOES NOT SHOW CORRECT TIME:

• There was a power outage. Set the clock again as described in "Setting the Clock".

CLEANING THE UNIT

•Do not use volatile chemicals on this unit. Clean by lightly wiping with a dry soft cloth.

•Keep the CD Drawer closed to keep dust out of the unit.

CLEANING THE CD

•If the CD skips or will not play, the disc may need to be cleaned. Before playing, wipe the disc from the center outwards with a clean cloth. After playing, store the disc in its case.

HANDLING THE CD

•Only touch the CD on the edge to avoid finger prints on the underside of the CD.

•Do not stick paper or tape on the underside of the CD, and do not write anything on the underside of the disc.

CD LENS CARE

•When your CD lens gets dirty it can cause the unit to output poor sound quality. To clean the lens you will need to purchase a

CD lens cleaner. For instructions on cleaning the CD lens, refer to the instructions accompanying the CD lens cleaner.

AVC MULTIMEDIA ("AVC") makes the following limited warranties. These limited warranties extend to the original consumer purchaser and is limited to non-commercial user of the product.

One Year Parts & Labor Warranty

AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or refurbished parts and products, at AVC's sole discretion.

During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must first call our

Customer Support Center at 1- 877- 252 - 6873, during the hours listed in the box below. The deternination of service will be made by AVC customer support.

PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the defective warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation charges to the service facility.

Packaging and Shipping Instruction

When you send the product to the AVC service facility you must use the original carton box and packing material or an equivalent as designated by AVC.

LIMITED WARRANTY

Your Responsibility

(1)You must retain your bill of sale to provide proof of purchase.

(2)These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.

(3)Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance, or use in violation of instructions provided with the product, or to product which has been altered or modified without authorization of AVC, or to products or parts thereof which have had the serial number removed or changed.

Out of Warranty

In the event your product requires repair after the limited warranty period has expired, please contact our Customer

Support Center at 1-877-252-6873 or www.rcaav.com

Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm,

Saturday: 9am-NOON Eastern time.

Important:

You are responsible for any transportation, shipping or insurance relative to the return of the product to our Product Returns Center.

All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.

This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.

For more information on other products and services, please contact our web site at www.rcaav.com.