Before you begin

Installing the battery in the player

1.Apply thumb pressure to slide the battery compartment cover in the direction of the arrow, then remove the cover.

2.Insert the supplied AAA battery, following the polarity marks in the battery compartment.

3.Replace the cover.

Refer to the battery level icon on the display to check the battery level. Replace the battery when the icon is empty.

Adding more storage space to the player

To increase the number of files you can store on the player:

1.Turn off the player.

2.Lift the cover from the micro SD slot and insert a

micro SD memory card as shown.

Do not force the card into the slot, as this may damage the card.

When micro SD card is inserted, the card icon shows on the display.

Connecting to the computer

USB port of your

computerPlayer

Rotate the USB plug out of the player body and connect the player to your PC as shown.

The player will turn on automatically and display "USB connected" on the display. The player will appear as a drive letter on your computer, a Mass Storage Class (MSC) device, and behave as a detachable drive for file transfer in one or both directions.

The RCA EasyRip™ Media Software installer (stored in the player*) will launch automatically. Click NEXT to begin the installation and follow the instructions to install the software on your PC.

The software installer can be deleted from the player after installation to free up more storage spaces.

• It might take several seconds for the player to be detected. Click Refresh in My Computer or Windows Explorer

to make sure the player has been detected.

The player is capable of transferring files at USB 2.0. If USB 2.0 port is available on your computer, use it to connect to your player.

The player is still backward compatible with the older USB 1.1 ports. However, you will not be able to take full advantage of the potential speed increase.

IMPORTANT: Don’t disconnect the USB cable to the PC or the player during the software installation.

If the installer does not auto-launch, go to MyComputer in the Start menu, find and open the drive letter associated with the player and then double-click the rcaeasyrip_setup file to launch the installer.

* The latest software can be downloaded from www.rcaaudiovideo.com.

9

Page 9
Image 9
RCA TC1601 Installing the battery in the player, Adding more storage space to the player, Connecting to the computer