![](/images/new-backgrounds/1272974/27297411x1.webp)
Connections & Setup
VCR
TV (back panel)
VIDEO | AUDIO | OUT TO TV | CH3 |
|
| OUT |
| 2 | |
|
| CH4 | ||
| R | L | ||
|
| |||
| IN | IN FROM ANT |
| |
| R | L |
|
|
R | L | VIDEO |
|
| OUT |
R AUDIO L/MONO VIDEO | ||
Pr | Pb | Y |
VIDEO 2
3
TV ANT
R | L/MONO | |
AUDIO | VIDEO |
VIDEO 1
From Cable or Antenna
1D
1B | 1A |
DVD | 1C* |
| |
| OUT |
Pr Pb Y | R L VIDEO |
|
| * If you connect an |
| the audio cables to the VIDEO 1 AUDIO jacks on the |
TV + DVD + VCR | back of the TV, not the VIDEO 2 AUDIO jacks. |
|
1.Connect your DVD Player to your TV.
A.Connect the audio (white and red) cables to the VIDEO 2 R and L/MONO AUDIO jacks on the back of the TV and to the Audio Output jacks on the DVD player.
B.If your DVD player has Component Output Jacks (Y, Pb, Pr), connect three video grade cables to the Y, Pb, Pr jacks on the DVD player and to the VIDEO 2 Y, Pb, Pr jacks on the back of the TV. If your DVD player doesnÕt have Y, Pb, Pr jacks, go to C.
C.If your DVD player has an
Note: If you connect an
D.Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO 2 VIDEO jack on the back of the TV.
2.Connect your TV to your VCR
Connect a coaxial cable to the TV ANT jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).
Note: If your VCR has A/V output jacks, you can connect your TV to your VCR using audio/video cables for better quality.
3.Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.
Go to page 7
4 | Graphics contained within this publication are for representation only. | Chapter 1 |