RCA TOCOM 1616332A manual Explanation of Jacks, Mono Audio

Connections & Setup

Explanation of Jacks

This section describes the jacks you can use to make connections. There are several ways to connect components to your TV.

TV ANT Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or if using the example on page 4, a VCR.

RL/MONO

AUDIO VIDEO S-VIDEO IN

VIDEO 1

VIDEO 1

Lets you connect a component such as a VCR or DVD player.

¥R (RIGHT) AUDIO Provides right audio connection. The right audio connector is usually red.

¥L/MONO AUDIO Provides left audio connection. The left audio connector is usually white.

¥VIDEO Provides composite video connection. The video connector is usually yellow.

¥S-VIDEO IN Provides better picture quality than the video jack because the color part of the signal is separated from the black and white part of the picture. When using S-VIDEO IN, make sure to connect left and right audio cables to the L/ MONO and R AUDIO Input jacks.

Chapter 1 Graphics contained within this publication are for representation only. 5