Using the Remote Control
Buttons
Component Buttons
Press one of the buttons to set the remote to operate that component.
|
| ER | VC | R1 | T |
|
|
| |||
| W |
|
| ||
O |
|
|
| V | |
P |
|
|
|
|
|
|
|
| R |
| |
|
|
| VC | 2•LD |
|
REW PLAY FF
REC STOP PAUSE
DISPLAY | HA | N | SEARCH |
C | |||
VOL |
|
| VOL |
TV
Turns on a compatible GE, RCA, or ProScan TV and sets the remote to control the TV.
Used with POWER button to turn on another brand of TV, other than GE, when the remote is programmed to control that TV. (See page 14.)
VCR Function Buttons
VCR1
Turns on a compatible GE, RCA, or ProScan VCR and sets remote to control the VCR.
VCR2•LD
Turns on a compatible GE, RCA, or ProScan VCR and sets remote to control VCR when it has been setup. (See page 11.)
Used with POWER button to turn on compatible RCA or ProScan LaserDisc player.
Press VCR1 (VCR2•LD) to set remote to control the VCR to use the function buttons.
MUTE | CHAN | PREV CH |
1 2 3
4 5 6
7 8 9
INPUT | 0 |
| TV•VCR |
CLEAR | * |
| SPEED |
| MENU |
|
|
| PROG |
| |
F.ADV |
|
| EDIT |
– SLOW | + | 3TRACKING4 | |
CHAN Up or Down
Selects next higher or lower channel in the VCRÕs channel memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries when setting the clock or VCR for a timer recording.
DISPLAY
Shows VCR operating displays on the TV screen.
Displays the time counter.
EDIT
Signals two properly connected VCRs to begin copying a tape. See page 25.
F.ADV (Frame Advance)
Lets you view one frame with each press of the button when tape is in
FF(Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture in forward motion during playback.
INPUT
Turns the line input on or off. L1 or L2 appears in VCRÕs display panel and VIDEO1 or VIDEO2 appears on TV screen. Line input refers to the signal coming from the component connected to the audio/video input jacks on the back (L1) or front (L2) of the VCR.
MENU•PROG
Displays the VCR MAIN MENU on the TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
12
