Playing a Tape
Playback
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TV’s video input to see the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The 
) lights, and the VCR indicator lights if the AUTO TV/VCR feature is set to ON. The tape automatically begins playback if the safety tab on the cassette has been removed and the AUTO PLAY feature is turned on.
|
|
| STOP•EJECT |
| RECORD |
VIDEO IN L•AUDIO IN•R |
|
| REW | PLAY | FWD |
|
|
| |||
|
|
|
| PAUSE |
|
MONO |
|
|
|
|
|
POWER | TV•VCR | S•VHS S•VHS AUTO | CHANNEL |
|
|
TRACKING
Safety Tab
3. Press PLAY•PAUSE on the VCR or PLAY on the remote or VCR, if necessary.
4. Press TRACKING up or down on the remote or the VCR to remove any streaks from the picture if necessary. See “Manual Tracking” section.
5. Press STOP•EJECT on the VCR or STOP on the remote to stop the tape.
6. Press REW on the VCR or the remote to rewind the tape.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of the tape during playback.
Power Off
If you press POWER while a tape is rewinding, the VCR turns off automatically when it is completely rewound.
6. Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
22