Hooking Up the VCR
RCA Digital Satellite Receiver
B.Advanced hookup with basic receiver.
Use this hookup if your TV has audio/video jacks and your receiver has one set of AUDIO/VIDEO jacks.
1. Set the CH3 CH4 switch on back of receiver to either channel 3 or 4.
You will tune the VCR to this channel to record from the satellite receiver. To watch the satellite receiver, tune your TV to its video input channel. If you want to watch or record the signal from your antenna, cable, or cable box, make sure the satellite receiver is turned off.
2. Set the CH3 CH4 switch on back of VCR to either channel 3 or 4.
You will tune the TV to this channel and use the TV•VCR button to watch the VCR.
3. Connect as shown.
This connection may require additional accessories not provided.
4. Plug in power cords of VCR, TV, and receiver.
5. Go to “Startup” section.
C.Advanced hookup with deluxe receiver.
Use this hookup if your TV has audio/video jacks and your receiver has two sets of AUDIO/VIDEO jacks.
1.Set the CH3 CH4 switch on back of VCR to either channel 3 or 4.
You will tune the TV to this channel and use the TV•VCR button to watch the VCR. To record from the satellite receiver, you will tune the VCR to its line input (L1). To watch the satellite receiver, tune your TV to its video input channel.
2. Connect as shown.
This connection may require additional accessories not provided.
3. Plug in power cords of VCR, TV, and receiver.
4. Go to “Startup” section.
VIDEO R AUDIO L
7