Trouble | Checks and Adjustments |
No Sound/ • If using battery power, batteries may be low. Replace if necessary.
Distortion/
Static • Check that the speaker Tuning Indicator Light is illuminated green. If not, adjust the Tuning Control Wheel until the light changes from red to green.
•Check that the antenna is in the upright position.
•Check that the Transmitter Audio Level Indicator Light is flickering intermittently. If you are using a fixed output and the light is on solid or flickering very rapidly, or if the light is not on at all, adjust the Output Level Control Wheel so that the light flickers intermittently.
or
•If you are using a variable output, make sure the Output Level Control Wheel is all the way left (as shown under ADJUST THE TRANSMITTER), and adjust the volume on the audio source up or down as necessary to make the light flicker intermittently.
•Change the position of the Transmitter Frequency Control Wheel to change the operating frequency. Then, readjust the speaker Tuning Control Wheel until the Tuning Indicator Light changes color to green.
•Try changing the physical location of the transmitter. Locate it as high and free of obstruction as possible. Avoid placing directly on top of a TV, if possible.
•Try moving the transmitter and speakers closer together. Sending the signal through certain materials, such as glass, tile, and metal, can decrease the effective transmitting distance of the system.
•Try changing the antenna position, particularly if you think you may be near maximum transmitting range.
No Sound • Check the left/right balance control on the audio source from One
Speaker
10
