Model 3a
Line Level Preamplifier
Design Details and Features | Technical Specifications |
Gain Architecture: All vacuum tubes signal path
Power Supply Architecture:•Detachable RFI/EMI shielded external power supply
• 11 discreet FET regulated- All gain stages
individually regulated buffered
•EMI/RFI power line filtration using AudioPrism’s pro- prietary
Input Connections:
Output Connections: Two pairs of single ended, gold plated Teflon® insulated, outputs for the connection of multiple amplifiers
Control Section:
Internal Construction: All circuit boards are vibration iso- lated,
Tube complement: (2) 6DJ8, (2) 12AU7 or 5814
Frequency Response: 3.5 Hz
Gain: 20 dB @ 1 kHz
Total harmonic Distortion: <.15% @ 1voltInput impedance: 20 kΩOutput impedance: 220Ω
Signal to noise: >90 dB (1volt @ 100 kΩ, 95 dB typical)
Stereo separation: > 90 dB from 10 Hz to 100 kHz
Channel Balance: .2 dB maximumMaximum Input Voltage: 7 volts RMSMaximum output Voltage: 17 volts RMS(0 dB attenuation, 1.3 volts RMS input, 1% THD)
AC power requirements: 120 VAC (100~240V available upon request)
Dimensions:
Preamplifier:Height: 3.92inches (9.96 cm)
Width: 17.00 inches (48.26 cm)
Depth: 12.50 inches (44.45 cm)
Weight: 14.0 lbs. net (5.45 kg)
Power Supply:Height: 3.0 inches (7.62 cm)
Width: 5.0 inches (12.70 cm)
Depth: 10.50 inches (4.60 cm)
Weight: 10.0 lbs. net (4.60 kg)
New York, New York 10021