11. Optional blade usage
OPT4 |
(1) |
(2) |
OPT5 |
OPT6
OPT7
26
WARNING
•When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.
■SET UP THE BLADE
1.Detach the line head assembly and the shaft completely. (OPT4)
2.Put on the blade, making the marked side face the holder, put the holder and the cover on, and fasten the blade with the bolt and washer. (OPT4)
(1)Cover:
(2)Holder:
IMPORTANT
Change the loop handle to the
(1)Bracket:
(2)
■BALANCE UNIT
1.Put on strap and attach unit to strap.
2.Slide clamp up or down until unit balances with head just touching on the ground. (OPT6)
■STARTING THE ENGINE
Please refer 5.For safe operation (P.9~10), 8.Operation (P.17).
WARNING
•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT7)