ASSEMBLY
NOTE: Make sure unit is assembled cor- rectly as shown in this manual.
Fitting the loop handle
SPosition the handle on the shaft. Note that the handle must be mounted be- tween the two arrows on the shaft.
SFit the screw, securing plate and wing nut as shown in the diagram.
STighten the wing nut.
115391527 Rev. 4 5/15/12
Fitting the trimmer guard and trimmer head
SFit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (D).
DB
C
AA
SFit the drive disc (B) on the output shaft. S Turn the shaft until one of the holes in the drive disc aligns with the corresponding
hole in the gear housing.
S Insert hex wrench (C) in the hole to lock the shaft.
S Screw on the trimmer head (H) in the op- posite direction to the direction of rota- tion.
H
STo dismantle, follow the instructions in the reverse order.