RedMax BCX2600S manual MA19, MA20, cylinder 2 intake air cooling vent back, 27 , Maintenance

9. Maintenance

MA19

(2)

(1)

MA20

order to be able to view the upper part of the cylinder.

IMPORTANT

•If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter. (MA19)

(1)cylinder

(2)intake air cooling vent (back)

■MUFFLER AND THE OTHER MAINTENANCE AFTER EVERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time. (MA20)

Ask the authorized servicing dealer for the combustion chamber’s maintenance.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

27 