RedMax BCZ3050T manual Set up, BCZ3050SW

BCZ3050S/T/SW

6. Set up

SE1

(1)

[BCZ3050S]

[BCZ3050T]

[BCZ3050SW]

SE2

(1)

SE3

[BCZ3050SW]

(1) (2)

[BCZ3050S]

[BCZ3050T]

IMPORTANT

Tighten the screws gradually by turns.

■INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1)

(1)About 19 inches (48cm)

(2)About 14.5 inches (37cm)

■HIP PAD

• Fix the tube by the band. (SE2)

(1) Band

■INSTALLING CUTTING ATTACHMENT GUARD

•Put the cutting attachment guard on the braket, attach it with the 2 screws. (SE3)

IMPORTANT

2 kinds of cutting attachment guard are packed in with BCZ3050SW. Choose the guard suitable for a line head. If the right guard is not used, it may lead to a serious accident. (SE3)

(1)Guard for Line Head (Red) : (T3245-24110)

(2)Guard for Blade (Black) : (T3246-24110)

SE4

■ INSTALLING LINE HEAD (SE4)

1. While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left-

U

handed)

S

2. Fit the line head assembly to the gear shaft over the holders. Hand-tighten it securely.

IMPORTANT

•You need not holder (B) and nut when installing the line head.

•Do not attach any metal blade to BCZ3050T.

US-9