Set up, SE1 SE2 SE3 Installing Handle SE1,  13 

6. Set up

•Mount the handle to the shaft tube and clamp it at your best operating position.

•Put the debris guard on the shaft tube near the gear box, attach it with the screw, washer and nut provided.

1.While locking the gear shaft by inserting the attached bar into the upper holder and the housing.

2.Rotate the cutting head to engage threads. Hand-tighten it securely.

Image 13

Contents

BT250 Page Contents Safety First Parts location Specifications 4   5  Fammille DE Moteur 5HCPS.025ADEM Symbols on the machine 6  Working Condition For safe operationWorking Circumstance  7   8  Working Plan Starting the Engine Before Starting the Engine 9   10  Using the Product If Someone Comes MaintenanceHandling Fuel  11   12  Transportation SE1 SE2 SE3 Installing Handle SE1 Set upInstalling Debris Guard SE2 Installing Cutting Head SE3 Fuel HOW to MIX Fuel 14  Recommended Mixing Ratio Gasoline 50OIL For Your Engine LIFE, Avoid Fueling the Unit OP1 OP2 OP3 OP4 Operation 16  Starting Engine OP5 OP6 Stopping Engine Adjusting Idling Speed OP5Line Head Usage Trimming Grass and Weeds  18  Adjusting the Line Length Refilling Trimming Line Maintenance 19   20  AIR Filter MA1 MA2 MA3 MA4Fuel Filter Spark Plug  22  MA5Muffler Spark Arrester MA6 MA7 Procedures to be Performed After Every 100 Hours of USE 23  Storage Troubleshooting guideCheck Probable Causes Action  24   25  Parts list  26  Drive Unit BT250 S/N 40400101 and up  27  BT25-50910 Housing Assy  28  Engine Unit BT250 S/N KU40001 and up Element  29  Limited Warranty RedMax Garantie limitée